Mitsubishi Eclipse / Eclipse Spyder (2000-2002). Service and repair manual — part 477
![](/vehicles/winoney/isene/butrele/aingis.png)
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-200
STEP 2. Using scan tool MB991502, check actuator test
item 03: Second Solenoid Valve.
(1) Connect scan tool MB991502 to the data link connector.
(2) Turn the ignition switch to "ON" position.
(3) Set scan tool MB991502 to actuator test mode for item 03,
Second Solenoid Valve.
•
An operation sound should be heard from solenoid
valve when the second solenoid valve is operated.
(4) Turn the ignition switch to "LOCK" (OFF) position.
Q: Is the solenoid valve operating properly?
YES : This malfunction can be intermittent. Refer to GROUP
00, How to Use Troubleshooting/Inspection Service
Points
−
How to Cope with Intermittent Malfunction
NO : Go to Step 3.
STEP 3. Check the solenoid valve output voltage at PCM
connector C-61 <2.4L Engine> or C-63 <3.0L Engine> by
backprobing.
(1) Do not disconnect connector C-61 <2.4L Engine> or C-63
<3.0L Engine>.
(2) Turn the ignition switch to "ON" position.
(3) Measure the voltage between terminal 106 and ground by
backprobing.
•
Voltage should be battery positive voltage.
(4) Turn the ignition switch to "LOCK" (OFF) position.
Q: Is the voltage normal?
YES : Go to Step 4.
NO : Go to Step 9.
AC001252
MB991502
16 PIN
AB
AC001657
CONNECTOR: C-61 <2.4L ENGINE> OR
C-63 <3.0L ENGINE>
PCM
AN
AC001963
C-61 <2.4L ENGINE> OR
C-63 <3.0L ENGINE>
CONNECTOR HARNESS
SIDE VIEW
AD
![](/vehicles/winoney/isene/butrele/cin.png)
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-201
STEP 4. Check connectors B-40 at solenoid valve
assembly and C-61 <2.4L Engine> or C-63 <3.0L Engine> at
PCM for damage.
Q: Are the connectors in good condition?
YES : Go to Step 5.
NO : Repair or replace it. Refer to GROUP 00E, Harness
Connector Inspection
.
STEP 5. Check harness for damage between solenoid
valve assembly connector B-40 terminal 4 and PCM
connector C-61 <2.4L Engine> or C-63 <3.0L Engine>
terminal 106.
Q: Is the harness wire in good condition?
YES : Go to Step 6.
NO : Repair it.
ACX02479
CONNECTOR: B-40
AE
AC001657
CONNECTOR: C-61 <2.4L ENGINE> OR
C-63 <3.0L ENGINE>
PCM
AN
ACX02479
CONNECTOR: B-40
AE
AC001657
CONNECTOR: C-61 <2.4L ENGINE> OR
C-63 <3.0L ENGINE>
PCM
AN
![](/vehicles/winoney/isene/butrele/xttourwao.png)
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-202
STEP 6. Check connector A-19X at A/T control relay for
damage.
Q: Is the connector in good condition?
YES : Go to Step 7.
NO : Repair or replace it. Refer to GROUP 00E, Harness
Connector Inspection
.
STEP 7. Check harness for damage between solenoid
valve assembly connector B-40 terminal 9 and A/T control
relay connector A-19X terminal 3.
Q: Is the harness wire in good condition?
YES : Go to Step 8.
NO : Repair it.
AC001655
CONNECTOR: A-19X
BATTERY
A/T CONTROL
RELAY
AD
ACX02479
CONNECTOR: B-40
AE
AC001655
CONNECTOR: A-19X
BATTERY
A/T CONTROL
RELAY
AD
![](/vehicles/winoney/isene/butrele/den.png)
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-203
STEP 8. Using scan tool MB991502, check actuator test
item 03: Second Solenoid Valve.
CAUTION
To prevent damage to scan tool MB991502, always turn the
ignition switch to "LOCK" (OFF) position before
connecting or disconnecting scan tool MB991502.
(1) Connect scan tool MB991502 to data link connector.
(2) Turn the ignition switch to "ON" position.
(3) Set scan tool MB991502 to the actuator test mode for item
03: second Solenoid Valve.
•
An operation sound should be heard from solenoid
valve when the second solenoid valve is operated.
(4) Turn the ignition switch to "LOCK" (OFF) position.
Q: Is the solenoid valve operating properly?
YES : This malfunction can be intermittent. Refer to GROUP
00, How to Use Troubleshooting/Inspection Service
Points
−
How to Cope with Intermittent Malfunction
NO : Replace the PCM.
STEP 9. Check connector B-40 at solenoid valve assembly
for damage.
Q: Is the connector in good condition?
YES : Go to Step 10.
NO : Repair or replace it. Refer to GROUP 00E, Harness
Connector Inspection
.
AC001252
MB991502
16 PIN
AB
ACX02479
CONNECTOR: B-40
AE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст