Mitsubishi Eclipse / Eclipse Spyder (2000-2002). Service and repair manual — part 646
CONVERTIBLE TOP
TSB Revision
BODY
42-131
CONVERTIBLE TOP ASSEMBLY
REMOVAL AND INSTALLATION
M1426201100026
INSTALLATION SERVICE POINT
>>A<< DRAIN TROUGH RETAINER INSTALLATION
When the top cover assembly is replaced, cut out the rear end
of the top cover assembly.
1. Install the drain trough retainer so that the drain trough
around the rear end of the top cover assembly covers a
suitable dimension.
Pre-removal Operation
•
Completely open the convertible top.
Post-installation Operation
•
Convertible Top Fit Adjustment (Refer to
.)
AC004121AC
1
5
4
3
1
2
REMOVAL STEPS
•
QUARTER BELT SIDE MOULDING /
BACK BELT MOULDING (REFER TO
GROUP 51 - MOULDINGS
•
QUARTER TRIM (REFER TO
GROUP 52A
−
TRIMS
•
REAR SPEAKER BRACKET (REFER
TO GROUP 54
−
SPEAKER
1. TOPSTACK DRIVE MOTOR
HARNESS CONNECTOR
2. DEFOGGER HARNESS
CONNECTOR (LH ONLY)
3. TOPSTACK WELL AND BODY
PANEL CONNECTION
>>A<<
4. DRAIN TROUGH RETAINER
5. CONVERTIBLE TOP ASSEMBLY
REMOVAL STEPS (Continued)
CONVERTIBLE TOP
TSB Revision
BODY
42-132
2. Cut out an excessive part at the rear end of the top cover
assembly as shown.
TOPSTACK DRIVE MOTOR
REMOVAL AND INSTALLATION
M1426201700028
AC004122
EXCESSIVE PART AT DRAIN TROUGH OF
THE TOP COVER ASSEMBLY
AB
DRAIN TROUGH RETAINER
Pre-removal Operation
•
Completely down the quarter window glass
AC004123
3
1
4
2
3
AB
REMOVAL STEPS
•
QUARTER BELT MOULDING
(REFER TO GROUP 51
−
MOULDING
•
QUARTER TRIM (REFER TO
GROUP 52A -TRIMS
•
REAR SPEAKER BRACKET (REFER
TO GROUP 54
−
SPEAKER
1. TOPSTACK DRIVE MOTOR
HARNESS CONNECTOR
2. MAIN PIVOT BASE ASSEMBLY
MOUNTING BOLT
3. MAIN PIVOT BASE ASSEMBLY
MOUNTING NUT
<<A>> >>A<<
4. TOPSTACK DRIVE MOTOR
ASSEMBLY
CONVERTIBLE TOP
TSB Revision
BODY
42-133
REMOVAL SERVICE POINT
<<A>> TOPSTACK DRIVE MOTOR ASSEMBLY REMOVAL
1. Lift the main pivot base assemblies at the same time as a
set.
2. Remove the topstack drive motor.
INSTALLATION SERVICE POINT
>>A<< TOPSTACK DRIVE MOTOR ASSEMBLY
INSTALLATION
1. Lift the main pivot base assemblies at the same time as a
set.
2. Open the convertible top fully, and install the topstack drive
motor.
INSPECTION
M1426201800025
TOPSTACK DRIVE MOTOR ASSEMBLY CHECK
1. Check that the topstack drive motor assembly runs smoothly
when the battery is connected directly to the motor
terminals.
2. Furthermore, check that the topstack drive motor assembly
operates in reverse when the terminal connections are
switched.
AC004099
CONVERTIBLE TOP
TSB Revision
BODY
42-134
TOPSTACK LATCH ASSEMBLY
REMOVAL AND INSTALLATION
M1426208800015
Pre-removal Operation
•
Completely open the convertible top.
Post-installation Operation
•
Convertible Top Fit Adjustment (Refer to
.)
AC004124
1
2
AB
REMOVAL STEPS
•
NO.1 BOW GARNISH (REFER TO
1. HEADLINER SCREW (REFER TO
.)
2. TOPSTACK LATCH ASSEMBLY
REMOVAL STEPS (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст