Mitsubishi Colt Ralliart. Manual — part 323

TROUBLE SYMPTOM CHART

SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR

54B-36

Keyless entry system

Keyless entry system does not work.

E-1

P.54B-84

Keyless entry hazard lamp answerback
function or the room lamp answerback
function does not work normally.

E-2

P.54B-86

Encrypted code cannot be registered.

E-3

P.54B-87

Multi-mode keyless entry system function
does not work at all.

E-4

P.54B-89

The timer lock function does not work after
the doors have been unlocked by the
keyless entry system.

E-5

P.54B-90

Windshield wiper and
washer

The windshield wipers do not work at all.

F-1

P.54B-91

The windshield wipers do not work when
the wiper switch is at "INT", "Washer" or
"Mist" position. However, the wipers work
at low speed when the switch is at "Lo" and
"Hi" position.

F-2

P.54B-95

The windshield wipers do not stop at the
specified park position.

F-3

P.54B-97

The windshield wipers do not work
normally.

F-4

P.54B-100

The intermittent wiper interval cannot be
adjusted by operating the windshield
intermittent wiper volume control.

F-5

P.54B-104

The intermittent wiper interval is not
changed according to the vehicle speed.

F-6

P.54B-105

The windshield washer does not work.

F-7

P.54B-107

Rear wiper and washer

Rear wiper does no not work at all.

G-1

P.54B-110

The rear wiper does not stop at the
specified park position.

G-2

P.54B-114

When the shift lever is moved to "R"
position during the rear wiper operation,
the rear wiper does not operate at the
continuous mode. <CVT>

G-3

P.54B-118

The rear washer does not work.

G-4

P.54B-119

Electric retractable remote
controlled door mirror

Electric retractable remote controlled door
mirror does not work at all.

H-1

P.54B-121

Electric retractable remote controlled door
mirror timer function does not at all.

H-2

P.54B-124

Vehicle speed-dependent unfolding
function does not work normally.

H-3

P.54B-125

Keyless entry system-linked fold/unfold
function does not work normally.

H-4

P.54B-125

Left or right side electric retractable remote
controlled door mirror does not work at all.

H-5

P.54B-126

Symptom

Inspection
procedure
number

Reference
page

Main

Index

Group

TOC

TROUBLE SYMPTOM CHART

SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR

54B-37

Ignition key cylinder
illumination lamp

The ignition key cylinder illumination lamp
does not illuminate/extinguish normally.

I-1

P.54B-131

Headlamp and tail lamp

The tail lamps do not illuminate normally.

J-1

P.54B-135

The low-beam headlamps do not illuminate
normally.

J-2

P.54B-138

The high-beam headlamps do not
illuminate normally.

J-3

P.54B-141

The high-beam and low-beam headlamps
do not illuminate when the passing switch
is operated.

J-4

P.54B-143

The headlamp(s) do not illuminate.

J-5

P.54B-144

The high-beam indicator lamps does not
illuminate.

J-6

P.54B-149

Any of tail lamps, position lamps or licence
plate lamp does not illuminate

J-7

P.54B-150

Fog lamp

The fog lamps do not illuminate normally

K-1

P.54B-156

Any of the fog lamps does not illuminate
normally.

K-2

P.54B-160

The fog lamps indicator does not illuminate
normally

K-3

P.54B-164

Flasher timer

The turn-signal lamps do not illuminate

L-1

P.54B-166

The hazard warning lamps do not
illuminate.

L-2

P.54B-169

Any of the turn-signal lamps does not
illuminate.

L-3

P.54B-171

The turn-signal indicator lamp does not
illuminate.

L-4

P.54B-180

The turn-signal lamps do not illuminate
when the ignition switch is at the ACC
position.

L-5

P.54B-181

Interior lamp

The interior lamps (room ramp, luggage
compartment lamp) does not illuminate or
extinguish normally.

M-1

P.54B-183

The room lamp does not illuminate
normally.

M-2

P.54B-188

The luggage compartment lamp does not
illuminate normally.

M-3

P.54B-193

The door-ajar warning lamp does not
illuminate/extinguish normally

M-4

P.54B-198

Symptom

Inspection
procedure
number

Reference
page

Main

Index

Group

TOC

CHECK TROUBLE BY USING THE INPUT SIGNAL CHECK

SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR

54B-38

CHECK TROUBLE BY USING THE INPUT SIGNAL CHECK

M1549024200590

<Data list, function diagnosis or pulse check>
If a problem is found in the Service Data or Pulse Check inspection, observe the table below.

Symptom

Inspection
procedure
number

Reference
page

The ignition switch (ACC) signal is not received.

N-1

P.54B-200

The ignition switch (IG1) signal is not received.

N-2

P.54B-202

The driver's door switch signal is not received.

N-3

P.54B-204

Column switch (lighting
and turn-signal lamp
switch)

The tail lamp switch signal is not received. N-4

P.54B-206

The headlamp switch signal is not
received.
The dimmer switch signal is not received.
The passing switch signal is not received.
The turn-signal lamp switch (LH) signal is
not received.
The turn-signal lamp switch (RH) signal is
not received.

Column switch (windshield
wiper/washer and rear
wiper washer switch)

The windshield mist wiper switch signal is
not received.

N-5

P.54B-207

The windshield intermittent wiper switch
signal is not received.
The windshield low-speed wiper switch
signal is not received.
The windshield high-speed wiper switch
signal is not received.
The windshield washer switch signal is not
received.
The rear wiper switch signal is not
received.
The rear washer switch signal is not
received.
The windshield intermittent wiper volume
signal is not received.

N-6

P.54B-208

The key reminder switch signal is not received.

N-7

P.54B-210

Signal is not received from the remote controlled mirror switch
(folding/unfolding switch).

N-8

P.54B-213

The hazard warning lamp switch signal is not received.

N-9

P.54B-216

All the door switch signals are not received.

N-10

P.54B-219

The driver's door lock actuator switch signal is not received.

N-11

P.54B-223

Each switch signal of the keyless entry transmitter is not received.

N-12

P.54B-226

The fog lamp switch signal is not received.

N-13

P.54B-228

The passenger's door switch signal is not received.

N-14

P.54B-231

Main

Index

Group

TOC

OPERATION AND FUNCTION QUICK-REFERENCE TABLE FOR INPUT SIGNAL INSPECTION PROCEDURES

SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR

54B-39

OPERATION AND FUNCTION QUICK-REFERENCE TABLE

FOR INPUT SIGNAL INSPECTION PROCEDURES

M1549020300506

If troubles have occurred in the functions which use the SWS simultaneously, observe the table below to
check input signals.
(This table shows only the input signals which will cause troubles in at least two functions simultaneously).

Function

N-1

N-2

N-3

N-4

N-5

N-7

N-10 N-11 N-12

Lamp reminder buzzer function

×

×

×

Door-ajar buzzer function

×

Turn-signal lamp operation sound function

×

Central door lock control

×

Keyless entry system

×

×

×

×

Keyless entry hazard answerback function

×

×

Multi-mode keyless entry

×

Power window timer function

×

×

Control of windshield wiper washer

×

×

Rear wiper washer control

×

×

Control of electric folding remote-controlled
mirror

×

Ignition key cylinder illumination lamp function −

×

×

×

Headlamp control

×

Tail lamp control

×

Fog lamp control

×

Turn-signal lamp control

×

×

Room lamp control

×

×

×

×

Door-ajar indicator lamp

×

×

Main

Index

Group

TOC

Была ли эта страница вам полезна?
Да!Нет
5 посетителей считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности