Mitsubishi Colt Ralliart. Manual — part 520
![](/vehicles/winoney/ama/flend/prif.png)
FRONT SEAT ASSEMBLY
INTERIOR
52A-20
FRONT SEAT ASSEMBLY
REMOVAL AND INSTALLATION <Except
RECARO seat>
M1522001301013
CAUTION
For the removal of the front seat assembly on vehicles with the side-air bags, refer to GROUP 52B,
Service Precautions
and Side and Curtain Air Bag Module
.
AC510323
2
5
Section A – A
1
5
2
3
4
1
5
2
4
2
A
A
A
A
A
A
A
A
30 ± 5 N·m
30 ± 5 N·m
44 ± 10 N·m
44 ± 10 N·m
44 ± 10 N·m
AB
NOTE
: Claw positions
2
1.
Headrestraint
Removal steps
2.
Rear anchor cover
3.
Seat belt switch connector (driver’s
side)
4.
Side-air bag module (squib)
connector <Vehicles with side and
curtain air bag module>
>>
A
5.
Front seat assembly
Removal steps (Continued)
Main
Index
Group
TOC
![](/vehicles/winoney/ama/flend/chethand.png)
FRONT SEAT ASSEMBLY
INTERIOR
52A-21
INSTALLATION SERVICE POINT
>>A<< FRONT SEAT ASSEMBLY INSTAL-
LATION
AC510324 AB
1. Confirm that the seat slide is locked. Then
temporarily tighten all the nuts and bolts with no
load applied to the front seat cushion.
2. Tighten all the nuts and bolts to the specified
torque.
Tightening torque:
Bolt: 44
± 10 N⋅m
Nut: 30
± 5 N⋅m
Main
Index
Group
TOC
![](/vehicles/winoney/ama/flend/ulagofffo.png)
FRONT SEAT ASSEMBLY
INTERIOR
52A-22
REMOVAL AND INSTALLATION
<RECARO seat>
M1522001301024
AC600697
1
2
AC
44 ± 10 N·m
30 ± 5 N·m
44 ± 10 N·m
Removal steps
1. Front seat anchor cover
>>
A
<<
2. Front seat assembly
INSTALLATION SERVICE POINT
>>A<< FRONT SEAT ASSEMBLY INSTAL-
LATION
AC600873AC
1. Confirm that the seat slide is locked. Then
temporarily tighten all the nuts and bolts with no
load applied to the front seat cushion.
2. Tighten all the nuts and bolts to the specified
torque.
Tightening torque:
Bolt: 44
± 10 N⋅m
Nut: 30
± 5 N⋅m
Main
Index
Group
TOC
![](/vehicles/winoney/ama/flend/stholikretht.png)
FRONT SEAT ASSEMBLY
INTERIOR
52A-23
DISASSEMBLY AND REASSEMBLY
<Except RECARO seat>
M1522001501084
AC602119
14
7
6
15
12
9
1
2
3
4
14
11
44 ± 10 N·m
AB
5
8
10
13
Disassembly steps
1.
Height adjuster lever cap
2.
Height adjuster lever
3.
Reclining adjuster lever
4.
Side shield cover outer
5.
Hook
6.
Armrest <Driver’s side>
7.
Inner seat belt
8.
Hinge cover
9.
Cushion cover <VRX> or cushion
cover and pad assembly <LS>
10. Cushion pad <VRX>
<<
A
>>
11. Headrestraint guide
12. Seatback cover <VRX> or seatback
cover and pad assembly <LS>
13. Seatback pad <VRX>
14. Side shield cover inner
<<
B
>>
15. Frame assembly
Disassembly steps (Continued)
Main
Index
Group
TOC
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст