Acura RLX HYBRID (2020 year). Manual in english — page 12
uu
Interior Lights/Interior Convenience Items
u
Interior Convenience Items
192
Co
ntrols
The tie-down anchors on the trunk floor can
be used to install a net for securing items.
The cargo hooks in the trunk can be used to
install a net for securing items.
■
Tie-down Anchors
1
Distribute cargo evenly on the floor of the trunk,
placing the heaviest items on the bottom and as far
forward as possible.
2
Hook
■
Cargo Hooks
1
Distribute cargo evenly on the floor of the trunk,
placing the heaviest items on the bottom and as far
forward as possible.
2
Hook
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Continued
193
uu
Interior Lights/Interior Convenience Items
u
Interior Convenience Items
Co
ntrols
In addition to the larger cargo area, the trunk
incorporates a small shelf above the High
Voltage (HV) battery module that can carry up
to 15 lbs (7 kg). Do not exceed this capacity.
The cargo net can be used to help hold down
items stored in the trunk.
In the event a flat tire, a tire repair kit is
provided beneath the trunk floor.
2
Temporarily Repairing a Flat Tire
■
Cargo Area
1
NOTICE
Heavy objects may damage the trunk shelf.
Make sure any items put on the shelf weigh less than
15 lbs (7 kg).
Tiered Storage Area
Cargo Net
U.S. models
Canadian models
-------------------------------------------------------------------------------------------------------------------------------------------------------------
uu
Interior Lights/Interior Convenience Items
u
Interior Convenience Items
194
Co
ntrols
The power mode must be in ON to use the
heated steering wheel.
Press the button on the left side of the
steering wheel.
When a comfortable temperature is reached,
press the button again to turn it off.
The heated steering wheel is turned off every
time you start the power system, even if you
turned it on the last time you drove the
vehicle.
■
Heated Steering Wheel
1
Do not use the heated steering wheel continuously
when the power system is off. Under such conditions,
the 12-volt battery may be weakened, making the
power system difficult to start.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Continued
195
uu
Interior Lights/Interior Convenience Items
u
Interior Convenience Items
Co
ntrols
The power mode must be in ON to use the
seat heaters.
Press the seat heater button:
Once - The HI setting (three indicators on)
Twice - The MID setting (two indicators on)
Three times - The LO setting (one indicator on)
Four times - The OFF setting (no indicators on)
■
Front Seat Heaters
*
1
Do not use the seat heaters even in LO when the
power system is off. Under such conditions, the 12-
volt battery may be weakened, making the power
system difficult to start.
3
WARNING
Heat induced burns are possible when
using seat heaters.
Persons with a diminished ability to sense
temperature (e.g., persons with diabetes,
lower-limb nerve damage, or paralysis) or
with sensitive skin should not use seat
heaters.
* Not available on all models
-------------------------------------------------------------------------------------------------------------------------------------------------------------
uu
Interior Lights/Interior Convenience Items
u
Interior Convenience Items
196
Co
ntrols
The power mode must be in ON to use the
seat heaters and ventilation.
Press the seat heater or the seat ventilation
button:
Once - The HI setting (three indicators on)
Twice - The MID setting (two indicators on)
Three times - The LO setting (one indicator on)
Four times - The OFF setting (no indicators on)
■
Front Seat Heaters and Ventilation
*
1
Front Seat Heaters and Ventilation
Do not use the seat heaters and the seat ventilation
even in LO when the power system is off. Under such
conditions, the 12-volt battery may be weakened,
making the power system difficult to start.
3
WARNING
Heat induced burns are possible when
using seat heaters.
Persons with a diminished ability to sense
temperature (e.g., persons with diabetes,
lower-limb nerve damage, or paralysis) or
with sensitive skin should not use seat
heaters.
* Not available on all models
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Continued
197
uu
Interior Lights/Interior Convenience Items
u
Interior Convenience Items
Co
ntrols
The power mode must be in ON to use the
seat heaters.
There is no heater in the rear center seating
position.
Press the seat heater button:
Once - The HI setting (three indicators on)
Twice - The MID setting (two indicators on)
Three times - The LO setting (one indicator on)
Four times - The OFF setting (no indicators on)
To open the sunglasses holder, push and
release the indent. To close, push it again until
it latches.
You can store eyeglasses and other small
items in this holder.
■
Rear Seat Heaters
1
Do not use the seat heaters even in LO when the
power system is off. Under such conditions, the 12-
volt battery may be weakened, making the power
system difficult to start.
3
WARNING
Heat induced burns are possible when
using seat heaters.
Persons with a diminished ability to sense
temperature (e.g., persons with diabetes,
lower-limb nerve damage, or paralysis) or
with sensitive skin should not use seat
heaters.
■
Sunglasses Holder
1
Keep the holder closed while driving except when
accessing stored items.
Push
-------------------------------------------------------------------------------------------------------------------------------------------------------------
uu
Interior Lights/Interior Convenience Items
u
Interior Convenience Items
198
Co
ntrols
The power rear sunshade can be operated with the power mode in ON.
To raise:
Press the button.
To lower:
Press the button again.
When the transmission is put into
(
R
, the rear
sunshade lowers automatically.
u
If the vehicle is travelling at 10 mph (15
km/h) or more, or if the transmission is
put into
(
P
, the sunshade returns to its
original position.
Even if the power mode is switched to OFF,
the sunshade can be operated for
approximately 1 minute.
■
Power Rear Sunshade
*
1
If the sunshade stops while moving, check for and
clear any obstacles, then push the button again.
3
WARNING
Opening or closing the sunshade on
someone’s hands or fingers can cause
serious injury.
Make sure all hands and fingers are clear of
the sunshade before opening or closing it.
Front
Rear
* Not available on all models
-------------------------------------------------------------------------------------------------------------------------------------------------------------
199
uu
Interior Lights/Interior Convenience Items
u
Interior Convenience Items
Co
ntrols
Pull the tab and roll up the sunshade all the
way. Use the hooks to hang it.
■
Expanded Rear Door Sunshades
*
1
Use the sunshades only when the windows are fully
closed. Using the shade while a window is open can
unhook and blow off the shade, hitting and possibly
hurting anyone sitting near the window.
Hook
Tab
* Not available on all models
-------------------------------------------------------------------------------------------------------------------------------------------------------------
200
Co
ntrols
Climate Control System
Using Automatic Climate Control
The automatic climate control system maintains the interior temperature you select.
The system also selects the proper mix of heated or cooled air that raises or lowers
the interior temperature to your preference as quickly as possible.
Use the system when the power system is on.
1.
Press the
AUTO
button.
2.
Adjust the interior temperature using the driver’s side or passenger’s side
temperature control switch.
3.
Press the
(on/off) button to cancel.
In addition to the button/switch operations, you can control the climate control
system from the On Demand Multi-Use Display
TM
touch screen.
1
Using Automatic Climate Control
If any buttons/icons on the touch screen are pressed
while using the climate control system in auto, the
function of the button/icon that was pressed will take
priority.
The AUTO indicator will go off, but functions
unrelated to the button/icon that was pressed will be
controlled automatically.
To prevent cold air from blowing in from outside, the
fan may operate at low speed for a while after the
AUTO
button has been pressed.
If the interior is very warm, you can cool it down
more rapidly by partially opening the windows,
turning the system on auto, and setting the
temperature to low. Change the fresh mode to
recirculation mode until the temperature cools down.
When you set the temperature to the lower or upper
limit,
Lo
or
Hi
is displayed.
Pressing the
button switches the climate control
system between on and off. When turned on, the
system returns to your last selection.
When you unlock the doors with your remote, the driver’s
ID (
Driver 1
or
Driver 2
) is detected, and the climate
control settings are turned to the respective mode
automatically when you set the power mode to ON.
The High Voltage battery level being low may reduce
the climate control system performance.
(On/off) Button
AUTO
Button
On Demand Multi-Use Display
TM
Driver’s Side
Temperature
Control Switch
Passenger’s Side
Temperature
Control Switch
Passenger’s Side
Temperature
Driver’s Side
Temperature
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Continued
201
uu
Climate Control System
u
Using Automatic Climate Control
Co
ntrols
■
Operating from the On Demand Multi-Use Display
TM
1
Using Automatic Climate Control
You can store two customized climate control
settings to the system and recall them from the On
Demand Multi-Use Display
TM
.
2
P. 218
On Demand Multi-Use Display
TM
A/C
(Air Conditioning) and
SYNC
(Synchronized) Icon
Driver’s Side
Vent Mode Icon
Driver’s Side
Temperature Control
Icon
Recirculation/
Fresh Air mode
Icon
Passenger’s Side
Vent Mode Icon
Fan Control Icon
Passenger’s Side
Temperature Control
Icon
-------------------------------------------------------------------------------------------------------------------------------------------------------------
uu
Climate Control System
u
Using Automatic Climate Control
202
Co
ntrols
■
Changing the interior temperature setting
1.
Select the driver’s or passenger’s side
temperature control.
2.
Change the temperature setting from the
following:
Temperature bar
: Select a point where your
desired temperature setting is.
Farther to the left is for a lower, and to the
right for a higher setting.
3
/
4
: To raise or lower the temperature
setting one degree at a time.
While you select and hold
3
/
4
, the
temperature decreases or increases.
MAX COOL ON/OFF
: To rapidly cool down
the interior.
u
The AUTO indicator comes on. The
setting returns to the previously selected
value when you select it again.
MAX HEAT ON/OFF
: To rapidly warm up the
interior.
u
The AUTO indicator comes on. The
setting returns to the previously selected
value when you select it again.
1
Using Automatic Climate Control
When you set the temperature to the lower or upper
limit,
Lo
or
Hi
is displayed.
When you set the
MAX COOL
or
MAX HEAT
,
MAX
COOL
or
MAX HEAT
is displayed.
The side you selected.
Temperature Bar
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Continued
203
uu
Climate Control System
u
Using Automatic Climate Control
Co
ntrols
■
Switching the vent mode
1.
Select the driver’s or passenger’s side vent
mode.
2.
Select a desired vent mode icon, or
Driver
Mode Auto
(driver’s side)/
Passenger
Mode Auto
(passenger’s side): The system
automatically selects the vent mode most
suitable to the ambient environment.
Vent mode
: Dashboard vents and back of the center
console
: Dashboard and floor vents, and back of
the center console
: Floor vents
: Floor and defroster vents (driver’s side
only)
■
A/C on and off
1.
Select
A/C
.
2.
Select
ON
or
OFF
.
1
While the climate control system is in auto,
Driver
Mode Auto
or
Passenger Mode Auto
is
highlighted.
The side you selected.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
uu
Climate Control System
u
Using Automatic Climate Control
204
Co
ntrols
■
SYNC on and off
1.
Select
SYNC
.
2.
Select
ON
for synchronization mode, and
OFF
for dual mode.
u
When in synchronization mode, the
passenger’s side temperature and vent
mode become the same as the driver’s
side settings.
3.
Adjust the temperature or change the
mode from the driver’s side.
■
Changing the fan speed
1.
Select .
2.
Change the fan speed with one of the
following:
The fan speed level indicators: Select your
desired speed level. The smaller indicator is
for a slower speed, and the larger for a
faster speed.
(
+
/
(
-
: To go up or down one level at a
time.
Fan AUTO
: The system automatically
selects the fan speed most suitable to the
ambient environment.
1
When you press the
button, the system changes
to synchronization mode.
When the system is in dual mode, the driver’s side
temperature and vent mode, and the passenger’s
side temperature and vent mode can be set
separately.
You can also return to dual mode by changing the
passenger’s side temperature or switching the vent mode.
The system adjusts each temperature based on the
information of the sunlight sensor and the sun
position updated by the navigation system’s GPS.
1
While the climate control system is in auto,
Fan
AUTO
is highlighted.
Fan Speed Level Indicators
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Continued
205
uu
Climate Control System
u
Using Automatic Climate Control
Co
ntrols
■
Switching between the recirculation and fresh air modes
1.
Select ,
or
currently
shown.
2.
Switch the mode depending on
environmental conditions to the following:
(recirculation mode): Recirculates air
from the vehicle’s interior through the system.
(auto mode): Automatically switch
between the recirculation and fresh air modes
most suitable to environmental conditions. If
the ambient temperature is low, the mode
may not change to recirculation to keep the
windows from fogging up.
(fresh air mode): Maintains outside
ventilation. Keep the system in fresh air mode
in normal situations.
1
Switching between the recirculation and fresh air modes
While the climate control system is in AUTO,
is
highlighted.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
uu
Climate Control System
u
Using Automatic Climate Control
206
Co
ntrols
■
Shortcuts
You can store two sets of your preferred temperature, fan speed, and vent mode
settings to the climate control system.
To store a set of the climate control settings:
1.
Select
Shortcuts
.
2.
Adjust the climate control system to your
preference.
2
3.
Select
Climate
.
4.
Select
Edit
.
5.
Select
Add
.
6.
Select
Preset 1
or
Preset 2
you want to
store your settings to.
To recall one of the settings:
1.
Select
Shortcuts
.
2.
Select
Climate
.
3.
Select
Preset 1
or
Preset 2
.
To delete a preset:
1.
Select
Shortcuts
.
2.
Select
Climate
.
3.
Select
Edit
.
4.
Select
Delete
.
5.
Select
Preset 1
or
Preset 2
you want to
delete.
1
You can also store a set by pressing and holding the
preset number you want to store that setting after
step 3.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Continued
207
uu
Climate Control System
u
Using Automatic Climate Control
Co
ntrols
Pressing the
button turns the air
conditioning system on and automatically
switches the system to fresh air mode.
Press the
button again to turn off, the
system returns to the previous settings.
■
To rapidly defrost the windows
1.
Press the
button.
2.
Select the recirculation mode.
2
Switching between the recirculation
and fresh air modes
P. 205
■
Defrosting the Windshield and Windows
1
Defrosting the Windshield and Windows
For your safety, make sure you have a clear view
through all the windows before driving.
Do not set the temperature near the upper or lower
limit.
When cold air hits the windshield, the outside of the
windshield may fog up.
If the side windows fog up, adjust the vents so that
the air hits the side windows.
1
To rapidly defrost the windows
After defrosting the windows, switch over to fresh air
mode.
If you keep the system in recirculation mode, the
windows may fog up from humidity. This impedes
visibility.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст