Acura RL (1996-2004 year). Manual — part 27
![](/vehicles/shign/ecital/fofa/wadarelyou.png)
• After spraying, allow the paint to settle for about
10 minutes, then force dry with an infrared lamp.
NOTE: Follow the paint manufacturer's instructions.
Body parts being dried with an
industrial dryer can get hot enough to cause injury. Do
no touch parts being dried.
21. Polishing/buffing
• Let the paint dry gradually, then polish the surface
carefully using a polishing compound and sponge
buffing pad.
• To remove lint or dirt, wet sand the surface with
#2000 paper or finer first, then polish with
compound.
NOTE: Polish all roughness caused by sanding thor-
oughly. To do this, first polish with very fine com-
pound, then with ultra fine compound.
• After polishing, remove the masking paper and tape,
and wash the entire vehicle thoroughly.
Main Menu
Table of Contents
![](/vehicles/shign/ecital/fofa/volailithe.png)
NH-585P (Cayman White
Pearl) Paint
Color Matching
Repair of NH-585P (Cayman White Pearl) paint coat requires
different procedures from that of metallic and pearl paint
coats.
Determination of color:
1. Using a #800 - #1000 sandpaper, sand the damaged paint
coat until the intermediate coat 2 appears.
2. Polish the exposed paint coat with an ultra fine com-
pound, then compare its color with the color sample
provided.
3. Prepare a paint based on the color sample selected
according to the instructions.
4. After preparing, check that the paint prepared matches
the color sample selected in step 2.
NOTE: On pearl paint, the color of the intermediate coat 2
will determine the final color of the paint repair.
Main Menu
Table of Contents
![](/vehicles/shign/ecital/fofa/ging.png)
NH-585P (Cayman White Pearl) Paint
Color Matching (cont'd)
Mixing (Reference):
The paint prepared should be mixed with thinner and hard-
ner as follows.
NOTE: The following examples are based on the paints
manufactured by ISAM Paint Co., Ltd High Art #3000).
PAINT (Intermediate Coat 2: color base)
2. Pour the mixture through a filter, then spray 2-3 light
coats over the damaged surface.
NOTE: Spray the mixture until the intermediate coat 2
is thoroughly covered.
3. Prepare paint for graduation by mixing 1 part of
Paint with 19 parts of the paint (B). Stir the mixture
well.
4. Pour the mixture through a filter, then spray 2-3 light
coats of the filtered mixture over paint Start at the center,
then work toward the edge.
NOTE:
• Check that the painted coat matches the color
of the body paint while spraying.
• Application of the mixture will determine the final
color of the paint repair. Do not spray the mixture
excessively as this may alter the final color of the
repair.
5. Apply 1-2 light coats of paint over the repaired
surface.
6. For the final top coat, add 15% thinner to a 4 : 1
mixture of the clear paint and hardener.
The above paints and materials or their equivalents should
be used.
NOTE: Follow the paint manufacturer's instructions when
mixing the paint and other materials.
Refinishing Procedures:
7. Spray 2-3 light final top coats over the damaged area.
• Ventilate when spraying paint. Most paint contains
substances that are harmful if inhaled or swallowed. Read
the paint label before opening paint container.
• Avoid contact with skin. Wear an approved respirator,
gloves, eye protection and appropriate clothing when
painting.
• Paint is flammable. Store in a safe place, and keep it
away from sparks, flames or cigarettes.
1. To prepare the first coat (paint ) add a 1 part of
paint to 1 part of paint and mix well.
Main Menu
Table of Contents
![](/vehicles/shign/ecital/fofa/deno.png)
Soft Chipping Guard Primer Coat
General
The removal of paint and Undercoating by stones and gravel immediately exposes metal to the atmosphere, causing it to rust. The
thickness of this rust increases if the process continues unchecked. The soft chipping guard primer protects against damage due
to the impact of flying objects. The purpose of this guide is to provide information you will find useful when repairing damage to
the protective coating. Refer to the Soft Chipping Primer Undercoating Diagram.
The soft chipping guard primer is applied over the E.D. (Electrostatically Deposited) primer. It is followed by guide coating and top
coating.
The soft chipping guard primer produces a smooth surface when dry. It should be sprayed so the thickness of the protective film
is 20 microns.
Main Menu
Table of Contents
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст