Mazda Transaxle FN4A-EL. Manual — part 5
K1–12
AUTOMATIC TRANSAXLE
34. Remove the pawl return spring.
35. Remove the end cover.
36. Remove the O-ring from the transaxle case.
37. Remove the band strut.
38. Remove the 2-4 brake band, and hold it together
using a piece of wire as shown in the figure.
39. Remove the clutch component.
A6E5714A017
A6E5714A018
A6E5714A019
X3U517AAT
X3U517AAU
AUTOMATIC TRANSAXLE
K1–13
K1
40. Remove the snap ring.
41. Remove the rear planetary gear component.
42. Remove the front sun gear by tapping its end with
a flathead screwdriver, etc. as shown in the
figure.
43. Remove the forward clutch hub.
44. Remove the front planetary gear component.
45. Remove the front internal gear and one-way
clutch component.
46. Remove the locknut.
X3U517AAV
X3U517AAW
A6E5714A020
A6E5714A021
X3U517AAZ
K1–14
AUTOMATIC TRANSAXLE
(1) Knock the crimped porsion of the locknut
outward by using a small chisel and a
hammer.
(2) Install the SST to the primary gear in the
order shown.
Tightening torque
19—25 N·m {1.9—2.6 kgf·m, 14—18 ft·lbf}
(3) Install the SST to the locknut in the order
shown.
(4) Remove the locknut.
47. Remove the primary gear by tapping it with a
flathead screwdriver, etc. as shown in the figure.
A6E5714A022
A6E5714A023
A6E5714A024
X3U517AB3
A6E5714A025
AUTOMATIC TRANSAXLE
K1–15
K1
48. Remove the bearing and distance piece.
Caution
••••
Removing the bearing race using a
flathead screwdriver can damage the
inside of the bearing race. Handle the
flathead screwdriver carefully.
49. Remove the bearing race indicated in the figure
from the end cover side using a flathead
screwdriver, etc.
50. Remove the bearing race indicated in the figure
from the converter housing side using a flathead
screwdriver, etc.
51. Remove the bearing race using the SST as
shown in the figure.
52. Tap the funnel at the areas indicated in the figure
using a flathead screwdriver, etc. to make gaps
big enough to installing the SST. Then remove
the bearing race.
53. Remove the funnel
Caution
••••
Removing the oil pipe using a flathead
screwdriver can damage the oil pipe.
Handle the flathead screwdriver carefully.
A6E5714A026
A6E5714A027
A6E5714A028
A6E5714A029
A6E5714A030
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст