Mazda Training manual — part 202
![](/vehicles/rke/hty/ntwithamb/des.png)
TC001-18-01H
INTRODUCTION TO M-MDS
07 - Reprogramming/Updating a PCM
Activity 07- Page 13
Activity 07
(Continued)
34. Turn the ignition key OFF, then
tap tick.
35. Tap
tick.
36. Tap tick again.
TC001-18-01H
INTRODUCTION TO M-MDS
07 - Reprogramming/Updating a PCM
Activity 07- Page 14
Activity 07
(Continued)
37. Follow the screen instructions to
complete the PCM update label.
If you are not sure where to place
the label, ask your instructor.
Tap
tick.
38. Start
the
engine, then tap tick.
39. Turn the ignition key OFF, then
tap tick.
![](/vehicles/rke/hty/ntwithamb/fowe.png)
TC001-18-01H
INTRODUCTION TO M-MDS
07 - Reprogramming/Updating a PCM
Activity 07- Page 15
Activity 07
(Continued)
40. Turn the ignition key ON, then
tap tick.
41. This screen flashes on then off.
42. Turn the ignition key OFF, then
tap tick.
![](/vehicles/rke/hty/ntwithamb/ifo.png)
TC001-18-01H
INTRODUCTION TO M-MDS
07 - Reprogramming/Updating a PCM
Activity 07- Page 16
Activity 07
(Continued)
43. Tap
Programmable Module
Installation, if it is not
highlighted, then tap
Go to Previous Screen.
44. Tap
Module Programming, if it
is not highlighted, then tap
Go to Previous Screen.
45. Tap
Exit PDS.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст