Mazda Training manual — part 200
![](/vehicles/rke/hty/ntwithamb/verul.png)
TC001-18-01H
INTRODUCTION TO M-MDS
07 - Reprogramming/Updating a PCM
Activity 07- Page 5
Activity 07
(Continued)
10. If desired, leave the fields empty or
tap data into any of the fields,
then tap TICK.
11. If this screen displays,
tap NO.
12. Tap
Programming then tap tick.
NOTE
This is an optional screen and you
may not see it.
![](/vehicles/rke/hty/ntwithamb/nepplenfede.png)
TC001-18-01H
INTRODUCTION TO M-MDS
07 - Reprogramming/Updating a PCM
Activity 07- Page 6
Activity 07
(Continued)
13. Tap
Module Programming, if it is not
highlighted, then tap tick.
14. Tap
Module Reprogramming,
then tap tick.
15. Tap
tick.
![](/vehicles/rke/hty/ntwithamb/kne.png)
TC001-18-01H
INTRODUCTION TO M-MDS
07 - Reprogramming/Updating a PCM
Activity 07- Page 7
Activity 07
(Continued)
16. This screen flashes on then off.
17. Tap
YES to retrieve the current
calibration file.
18. You may see the following screens,
depending on the status of your PDS.
Follow the onscreen instructions.
![](/vehicles/rke/hty/ntwithamb/zetan.png)
TC001-18-01H
INTRODUCTION TO M-MDS
07 - Reprogramming/Updating a PCM
Activity 07- Page 8
Activity 07
(Continued)
19...Reconnect the PDA to the vehicle, then
tap tick.
20. Tap
tick.
21. Tap
YES to run a self test to identify
any DTCs that may be present.
NOTE
Do not tap tick until you have
reconnected the PDA to the vehicle.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст