Lexus LC Cabriolet (2021 year). Manual in english — page 4
89
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
The units used on the meters may differ depending on the target region.
Engine oil temperature gauge/Eco Driving Indicator
Displays the engine oil temperature or Eco Driving Indicator (
P.87)
Outside temperature
Displays the outside temperature within the range of -40°C (-40°F) to 50°C (122°F)
Low outside temperature indicator comes on when the ambient temperature is 3°C
(37°F) or lower
Tachometer
Displays the engine speed in revolutions per minute
Speedometer
Shift position/shift range/gear position (
P.195)
Shift position indicator (
P.197)
Clock
Time displayed is linked to the analog clock on the instrument panel. (
P.323)
Engine coolant temperature gauge
Displays the engine coolant temperature
Gauges and meters
When the main meter is in the side position, some of the meter displays and the
gauge layout will be changed.
Meter display
A
B
C
D
E
F
G
H
90
2-1. Instrument cluster
If the engine coolant temperature gauge indicator enters the red zone, a buzzer sounds
and the high coolant temperature warning light comes on
Odometer and trip meter display
Odometer:
Displays the total distance the vehicle has been driven
Trip meter:
Displays the distance the vehicle has been driven since the meter was last reset
Trip meters “A” and “B” can be used to record and display different distances inde-
pendently
Fuel gauge
Displays the quantity of fuel remaining in the tank
Multi-information display
Presents the driver with a variety of vehicle data (
P.93)
Displays warning messages in case of a malfunction (
P.396)
Q
Speed warning
When the vehicle reaches the set
speed, the speed warning display will
flash.
This setting can be enabled on the
multi-information display. (
P.93)
Always observe the legal speed limit when
driving on public roads.
Q
Rev indicator
When the engine reaches a set speed
or the red zone, a ring-shaped indica-
tor will be displayed on the tachome-
ter.
The indicator will be displayed in
amber (
) when the engine speed
reaches a set speed, and in red (
)
when the engine speed reaches the
red zone. This setting can be enabled
on the multi-information display.
(
P.97)
Q
Rev peak
When the engine speed reaches or
exceeds 3600 r/min, an afterimage of
the tachometer will be displayed at the
highest engine speed for approxi-
mately 1 second.
I
J
K
A
B
91
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
Q
The meters and display illuminate when
The engine switch is in ON.
Q
Variable red zone
To help protect the engine, the engine
speed is controlled by starting the red zone
of the tachometer at different engine
speeds ranging from 3700 r/min to 7300
r/min depending on the engine coolant
temperature.
Before driving under extremely high load
conditions, make sure to sufficiently warm
up the engine.
Q
Instrument panel brightness adjustment
The brightness of the instrument panel
lights is automatically adjusted based on the
light sensor detecting how bright the sur-
roundings are.
Q
Outside temperature display
O
In the following situations, the correct
outside temperature may not be dis-
played, or the display may take longer
than normal to change.
• When stopped, or driving at low speeds
(less than 20 km/h [12 mph])
• When the outside temperature has
changed suddenly (at the entrance/exit
of a garage, tunnel, etc.)
O
When “- -” or “E” is displayed, the system
may be malfunctioning.
Take your vehicle to any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
Q
Pop-up display
O
In some situations, such as when a switch
operation is performed, a pop-up display
will be temporarily displayed on the
multi-information display.
O
Some pop-up displays can be set on/off.
(
P.97)
Q
Liquid crystal display
Small spots or light spots may appear on the
display. This phenomenon is characteristic
of liquid crystal displays, and there is no
problem continuing to use the display.
Q
Customization
The meter display can be customized on
the multi-information display. (
P.435)
The odometer and trip meter displays
can be switched. When the trip meter
is displayed, pressing and holding the
button will reset the trip meter.
NOTICE
Q
To prevent damage to the engine and
its components
O
Do not let the indicator of the tachom-
eter enter the red zone, as it rep-
resents the engine speed range which
exceeds the maximum safe engine
speed.
O
In the following situations, the engine
may be overheating. In this case,
immediately stop the vehicle in a safe
place, and check the engine after it has
cooled completely. (
P.420)
• The engine coolant temperature
gauge is in the red zone (H).
• The engine oil temperature gauge is in
the red zone (H).
Changing between the odome-
ter and trip meter
92
2-1. Instrument cluster
The brightness of the instrument panel
lights can be adjusted.
1
Darker
2
Brighter
Q
Instrument panel brightness adjustment
The instrument panel brightness levels
when the tail lights are on and off can be
adjusted individually. However, when the
surroundings are bright (daytime, etc.),
turning on the tail lights will not change the
instrument panel brightness.
The display can be switched between
the center and side positions.
Changing the instrument panel
light brightness
Changing the display
93
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
Q
Display
When the main meter is in the cen-
ter position
Displays various drive information on
the main meter.
Some of the content which are displayed
when the main meter is in the side position
cannot be displayed.
When the main meter is in the side
position
Selecting a menu icon displays a vari-
ety of vehicle data or allows vehicle
settings to be customized.
Q
Menu icons
Q
Opening image display
When the engine switch is in ACC or ON,
the opening image is displayed on the multi-
information display.
While the opening image is being dis-
played, the meter display cannot be
changed even if the drive mode is changed.
When the opening image is finished, the
meter display for the currently selected
mode will be displayed.
Q
When disconnecting and reconnecting
battery terminals
Record of the maximum G-forces will be
reset.
Q
Liquid crystal display
P.91
Multi-information display
Display and menu icons
Drive information (
P.94)
Navigation system-linked dis-
play (if equipped) (
P.96)
Audio system-linked display
(
P.97)
Driving assist system informa-
tion (
P.97)
Warning message display
(
P.396)
Settings display (
P.97)
WARNING
Q
Caution for use while driving
O
When operating the multi-information
display while driving, pay extra atten-
tion to the safety of the area around
the vehicle.
O
Do not look continuously at the multi-
information display while driving as
you may fail to see pedestrians, objects
on the road, etc. ahead of the vehicle.
94
2-1. Instrument cluster
The multi-information display is oper-
ated using the meter control switches.
/
: Switch menu
/
: Change displayed con-
tent, scroll up/down the screen and
move the cursor up/down
Press: Enter/Set
Press and hold: Reset
Return to the previous screen and
move the main meter
Call sending/receiving and history
display
Linked with the hands-free system, sending
or receiving call is displayed. For details
regarding the hands-free system, refer to
“NAVIGATION SYSTEM OWNER’S
MANUAL”.
Q
Content of drive information
Select to display various drive data.
Up to 2 of the following items can be
selected.
Items displayed can be switched by
pressing
or
of the meter con-
trol switches to select
and then
pressing
or .
Current fuel consumption
*1
Displays the current rate of fuel consump-
tion
Average fuel economy (after
reset
*2
/after start/after refuel)
*1
Displays the average fuel consumption
since the function was reset, the engine
was started, and the vehicle was refueled,
respectively
Use the displayed average fuel consump-
tion as a reference.
Average speed (after reset
*2
/after
start)
*1
Displays the average vehicle speed since
the function was reset and the engine was
started, respectively
Elapsed time (after reset
*2
/after
start)
*1
Displays the elapsed time since the func-
WARNING
Q
The information display at low tem-
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
For example, there is a lag between the
driver’s shifting and the new gear num-
ber appearing on the display. This lag
could cause the driver to downshift
again, causing rapid and excessive
engine braking and possibly an accident
resulting in death or injury.
Changing the meter display
A
B
C
D
Drive information
95
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
tion was reset and the engine was started,
respectively
Distance (range/after start)
*1
Displays the estimated maximum distance
that can be driven with the quantity of fuel
remaining and the distance driven after the
engine was started respectively.
• This distance is computed based on your
average fuel consumption. As a result,
the actual distance that can be driven
may differ from that displayed.
• When only a small amount of fuel is
added to the tank, the display may not be
updated.
When refueling, turn the engine switch
off. If the vehicle is refueled without turn-
ing the engine switch off, the display may
not be updated.
*1
: Displayed when the item is set in “Drive
Info 1” and “Drive Info 2”.
*2
: The function can be reset by pressing
“OK” of the meter control switches for
longer than 1 second when the item to
reset is displayed.
If there is more than one item that can
be reset, the item selection screen will
appear.
Q
Eco Driving Indicator/engine oil
temperature gauge
P.87, 89
Q
Tire pressure
P.346
Q
Gear positions
Displays the current shift range or gear
position when the shift position is in D
or M.
Q
Units (if equipped)
The units of measure used can be
changed while driving.
Unlike the units setting performed on the
settings display, the units setting per-
formed on the drive information menu can
be changed while driving.
Q
G-force
Displays lateral G-forces on the vehi-
cle
Reading the display
• Normal display
Displays the following on the multi-infor-
mation display
Acceleration G-force on the vehicle
Current G-force value (analyzed value
of front/rear and left/right G-forces)
• Advanced display
Displays the following on the multi-infor-
mation display and main meter
Multi-information display:
A
B
96
2-1. Instrument cluster
Acceleration G-force on the vehicle
Record of the maximum G-forces
Value of the maximum G-force since
display reset (analyzed value of
front/rear and left/right G-forces)
This display is intended for use as a guide-
line. Depending on factors such as the
road surface condition, temperature and
vehicle speed, the display may not show
the actual condition of the vehicle.
Main meter:
G-force direction
Current G-force value (analyzed value
of front/rear and left/right G-forces)
This display is intended for use as a guide-
line. Depending on factors such as the
road surface condition, temperature and
vehicle speed, the display may not show
the actual condition of the vehicle.
Switching the display
To switch to advanced display, press “OK”.
To return to normal display, press “OK”.
Resetting the record of maximum
G-forces
With the record of maximum G-forces dis-
played, press and hold “OK” to reset the
display.
Peak hold function (advanced dis-
play only)
If lateral G-forces of 0.5 G or greater are
generated, the G-force value displayed on
the main meter will turn yellow and be held
for 3 seconds.
Q
LKA (Lane-Keeping Assist) vehi-
cle sway warning
P.241
Q
Display off
A blank screen is displayed
Select to display the following naviga-
tion system-linked information.
Route guidance
Compass display
A
B
C
A
B
Navigation system-linked dis-
play (if equipped)
97
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
Select to enable selection of an audio
source etc. on the meter using the
meter control switches.
Select to display the dynamic radar
cruise control with full-speed range
(
P.252)/LKA (Lane-Keeping
Assist) (
P.240) information, when
the system is used.
Select to display warning messages
and measures to be taken if a malfunc-
tion is detected. (
P.396)
Select to change the meter display set-
tings.
Q
Language
Select to change the language on the
display.
Q
Units
Select to change the unit of measure
for fuel consumption.
Q
Eco Driving Indicator Light
Select to activate/deactivate the Eco
Driving Indicator Light.
Q
Drive information 1/Drive informa-
tion 2
Select up to 2 items that will be dis-
played on the “Drive Info 1” screen and
“Drive Info 2” screen respectively.
(
P.94)
Q
Pop-up display
Select to set the following pop-up dis-
plays, which may appear in some situa-
tions, on/off.
• Route guidance display of the navi-
gation system-linked system (if
equipped)
• Making call display of the hands-
free phone system
• Audio system operation display
• Instrument panel brightness adjust-
ment display
Q
Ring position memory
Select to change the meter ring posi-
tion when the engine is started.
The position before the engine is
stopped or the center position can be
selected.
Q
Accent color
Select to change the accent color on
the screen, such as the cursor color.
Q
Rev indicator
Select to set the rev indicator on/off.
When set to on, proceed to select the
engine speed at which the rev indica-
tor will be displayed.
Q
Rev peak
Select to set the rev peak on/off.
Q
Clock
Select to switch between 24-hour dis-
play and 12-hour display.
Audio system-linked display
Driving assist system informa-
tion
Warning message display
Settings display
98
2-1. Instrument cluster
Q
Initialization
Select to reset the meter display set-
tings.
Q
Suspension of the settings display
In the following situations, operation of the
settings display will be temporarily sus-
pended.
O
When a warning message appears on the
multi-information display
O
When the vehicle begins to move
Q
Customization
The settings can be changed on
of the
multi-information display.
O
Settings of the driving assist systems
(
P.435)
O
Vehicle settings (
P.100, 357, 358,
435)
Displays suggestions to the driver in
the following situations. For some sug-
gestions, a response to a displayed
suggestion can be selected. To select a
response, use the meter control
switches.
The suggestion function can be turned
on/off.
Q
Suggestion to turn on the head-
lights
If the headlight switch is in other than
or
, and the vehicle speed is 5
km/h (3 mph) or higher for a certain
amount of time when the surroundings
are dark, a suggestion message will be
displayed.
Q
Suggestion to close the power win-
dows (linked to windshield wiper
operation)
If the windshield wipers are operated
with a power window open, a sugges-
tion message will be displayed asking if
you wish to close the power windows.
To close all of the power windows,
select “Yes”.
Q
Suggestion to unlock the power
windows
If it is attempt to close the passenger’s
side window using the power window
switch on the driver’s door or all win-
dow control switch, a suggestion mes-
sage will be displayed.
Q
Customization
The suggestion function can be turned
on/off. (Customizable features:
P.435)
WARNING
Q
Cautions during setting up the dis-
play
As the engine needs to be running
during setting up the display, ensure that
the vehicle is parked in a place with ade-
quate ventilation. In a closed area such as
a garage, exhaust gases including harm-
ful carbon monoxide (CO) may collect
and enter the vehicle. This may lead to
death or a serious health hazard.
NOTICE
Q
While setting up the display
To prevent battery discharge, ensure
that the engine is running while setting up
the display features.
Suggestion function
99
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
*
: If equipped
Navigation system-linked display
area (if equipped)
Displays the following items, which are
linked to the navigation system:
• Speed limit
• Street name
• Route guidance to destination
• Compass
Driving assist system status display
area
Displays the current shift position, and shift
range/gear position, or the operational
status of the following systems:
• Pre-collision warning (Pre-Collision
System) (
P.232)
• Dynamic radar cruise control with full-
speed range (
P.252)
• LKA (Lane-Keeping Assist) (
P.232)
• Lexus parking assist-sensor (
P.263)
Displayed content is the same as that dis-
played on the multi-information display.
For details, refer to the explanations of
each system.
Vehicle speed display
Information display area (
P.101)
Displays the following items:
• Warning/message
•
/
icon (
P.101)
• Audio system operation status
• Dynamic radar cruise control with full-
speed range status (
P.252)
• Hands-free system status (
P.101) (if
equipped)
• Eco Driving Indicator/tachometer
(
P.102)
HUD (Head-up display) switch
Q
Enabling/Disabling the head-up
display
Pressing the switch turns the head-up
display on/off.
Head-up display
*
The head-up display is linked to the
meters and navigation system and
projects a variety of information in
front of the driver, such as the cur-
rent vehicle speed and route guid-
ance to a set destination.
System components
A
B
Using the head-up display
C
D
E
100
2-1. Instrument cluster
Q
Changing settings of the head-up
display
Select
on the multi-information dis-
play (
P.93) to change the following
settings:
Display brightness/position
Select to adjust the brightness and position
of the head-up display.
Eco Driving Indicator/tachometer
Select to display Eco Driving Indicator,
tachometer or no content.
Display content
Select to enable/disable the following
items:
• Route guidance to destination
• Driving assist system status
• Compass
• Audio system operation status
Display angle
Select to adjust the angle of the head-up
display.
Q
Head-up display
O
The head-up display may seem dark and
hard to see when viewed through sun-
glasses, especially polarized sunglasses.
Adjust the brightness of the head-up dis-
play or remove your sunglasses.
O
When the head-up display is turned off, it
will remain off even if the engine switch is
turned to ACC or ON after the engine
switch has been turned off.
O
The startup image will be displayed on
the head-up display after the engine
switch has been turned to ON while the
head-up display switch is set to on.
Q
Display brightness
The brightness of the head-up display can
be adjusted on
of the multi-information
display. Also, it is automatically adjusted
according to the ambient brightness.
Q
Head-up display automatic position
adjustment
If the display position is recorded into mem-
ory, the head-up display will be automati-
cally adjusted to the desired position.
(
P.161)
Q
When the battery is disconnected
The customize settings of the head-up dis-
play will be reset.
Q
Customization
Settings (e.g. display) can be changed.
(Customizable features:
P.435)
WARNING
Q
Before using the head-up display
O
Check that the position and brightness
of the head-up display image does not
interfere with safe driving. Incorrect
adjustment of the image’s position or
brightness may obstruct the driver’s
view and lead to an accident, resulting
in death or serious injury.
O
Do not continuously look at the head-
up display while driving as you may fail
to see pedestrians, objects on the
road, etc. ahead of the vehicle.
101
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
Displays the following items in the
appropriate situation:
Q
Warning/message
Displays the following warning/mes-
sages:
• Master warning message
• Notification message (Dynamic
radar cruise control with full-speed
range)
• Other messages
Q
/
icons
Displays the following multi-informa-
tion display linked icons:
: Master warning icon
Displayed when a warning message is
displayed on the multi-information dis-
play. (
P.396)
: Information icon
Displayed when a suggestion/advice
pop-up display is displayed on the
multi-information display. (
P.98)
Q
Hands-free system status
Displayed when the hands-free system
is operated.
Q
Audio system operation status
Displayed when the audio system is
operated.
Q
Eco Driving Indicator/tachometer
Displays either of Eco Driving Indica-
tor or the tachometer.
WARNING
Q
Caution for changing settings of the
head-up display
As the engine needs to be running while
changing the settings of the head-up dis-
play, ensure that the vehicle is parked in a
place with adequate ventilation. In a
closed area such as a garage, exhaust
gases including harmful carbon monox-
ide (CO) may collect and enter the vehi-
cle. This may lead to death or a serious
health hazard.
NOTICE
Q
To prevent damage to components
O
Do not place any drinks near the head-
up display projector. If the projector
gets wet, electrical malfunctions may
result.
O
Do not place anything on or put stick-
ers onto the head-up display projector.
Doing so could interrupt head-up dis-
play indications.
O
Do not touch the inside of the head-up
display projector or thrust sharp edges
or the like into the projector.
Doing so could cause mechanical mal-
functions.
Q
When changing the settings of the
head-up display
To prevent battery discharge, ensure
that the engine is running while changing
the settings of the head-up display.
Information display area
102
2-1. Instrument cluster
Displays the following items which are
linked to the navigation system:
Q
Speed limit
The speed limit on the current road.
Q
Street name
When the navigation system is per-
forming route guidance, the name of
the next street will be displayed on the
top of the display area.
Q
Route guidance to destination
Displayed when the navigation system
is performing route guidance. When
approaching an intersection, an arrow
will be displayed to indicate the sug-
gested direction of travel.
Q
Compass
Displays the direction of travel.
Q
Street name display
Only street names which are included in the
map data will be displayed.
Q
Eco Driving Indicator
Eco Driving Indicator Zone Display
Eco driving ratio based on acceler-
ation
Zone of Eco driving
Displayed content is the same as that dis-
played on the multi-information display
(Eco Driving Indicator). For details, refer to
P.87.
Q
Tachometer
Displays the engine speed in revolu-
tions per minute.
Navigation system-linked dis-
play area (if equipped)
Eco Driving Indicator/tachome-
ter
A
B
C
103
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
Center Display
“MENU” button
Touchpad
Press the “MENU” button on the
Remote Touch, then select
on the
menu screen, and then select “Trip
information” or “History”.
Q
Trip information
If a screen other than “Trip informa-
tion” is displayed, select “Trip informa-
tion”.
Resetting the consumption data
Fuel consumption in the past 15
minutes
Current fuel consumption
Average vehicle speed since the
engine was started.
Elapsed time since the engine was
started.
Cruising range
Average fuel consumption for the past 15
minutes is divided by color into past aver-
ages and averages attained since the
engine switch was last turned to ON. Use
the displayed average fuel consumption as
a reference.
The image is an example only, and may
vary slightly from actual conditions.
Q
History
If a screen other than “History” is dis-
played, select “History”.
Fuel consumption informa-
tion
Fuel consumption information can
be displayed on the Center Display.
The consumption screen can be
displayed on the side display.
System components
Consumption
A
B
C
A
B
C
D
E
F
104
2-1. Instrument cluster
Best recorded fuel consumption
Latest fuel consumption
Previous fuel consumption record
Resetting the History data
Updating the latest fuel consump-
tion data
The latest fuel consumption history is
divided by color into past averages and the
average fuel consumption since the last
updated. Use the displayed average fuel
consumption as a reference.
The image is an example only, and may
vary slightly from actual conditions.
Q
Updating the History data
Update the latest fuel consumption by
selecting “Update” to measure the current
fuel consumption again.
Q
Resetting the data
The fuel consumption data can be deleted
by selecting “Clear”.
Q
Cruising range
Displays the estimated maximum distance
that can be driven with the quantity of fuel
remaining.
This distance is computed based on your
average fuel consumption. As a result, the
actual distance that can be driven may differ
from that displayed.
Display the vehicle information on the
side display (
P.303) and then select
or
to display the desired
screen.
Q
Trip information (type A)
Displays the average fuel consumption
for the past 10 minutes in 1 minute
intervals, as well as the cruising range.
The image is an example only, and may
vary slightly from actual conditions.
Use the displayed average fuel consump-
tion as a reference.
Q
Trip information (type B)
Displays the cruising range, latest fuel
consumption and the amount of time
elapsed since the engine was started.
The image is an example only, and may
vary slightly from actual conditions.
A
B
C
D
E
Using the side display
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст