Defender (1999-2002). Manual — part 14
![](/vehicles/onond/ycatth/que/son.png)
MAINTENANCE
11
MAINTENANCE
BRAKE FLUID
1. Renew brake fluid. See BRAKES,
Adjustment.
AIR FILTER ELEMENT AND DUMP VALVE
1. Replace air cleaner element. See FUEL
SYSTEM, Repair.
2. Remove all dirt from dump valve.
![](/vehicles/onond/ycatth/que/abing.png)
10
MAINTENANCE
12
MAINTENANCE
AUXILIARY DRIVE BELT
Check
1. Check auxiliary drive belt for signs of splits,
fraying, oil contamination and wear.
NOTE: Any requirement to replace the
auxiliary drive belt should be advised to
the customer as this will incur additional
labour and/or material cost and should not be
carried out without the authorisation of the
customer.
Renew
1. Renew auxiliary drive belt. See ELECTRICAL,
Repair.
NOTE: Additional time is built into the
96,000/8 year service time to allow for
auxiliary drive belt renewal.
PAS FLUID, CLUTCH FLUID AND SCREEN
WASHER LEVELS
PAS Fluid
1. Clean arear around PAS reservoir filler cap, and
remove cap.
2. Check fluid level in PAS reservoir.
3. Top-up if necessary to the correct level using
recommended fluid. See LUBRICANTS,
FLUIDS AND CAPACITIES, Information.
4. Fit filler cap.
![](/vehicles/onond/ycatth/que/lywo.png)
MAINTENANCE
13
MAINTENANCE
Clutch Fluid
1. Clean area around clutch fluid reservoir cap, and
remove cap.
2. Check fluid level in clutch fluid reservoir.
3. Top-up if necessary to the correct level using
recommended fluid. See LUBRICANTS,
FLUIDS AND CAPACITIES, Information.
4. Fit filler cap.
Screen Washer Fluid
1. Clean area around washer fluid filler cap.
2. Check washer fluid level in reservoir.
3. Top-up if necessary to the correct level using
recommended fluid. See LUBRICANTS,
FLUIDS AND CAPACITIES, Information.
4. Fit filler cap.
STEERING BOX
Check
1. Check steering box for fluid leaks.
Adjust
1. Check there is no backlash in steering box with
the road wheels in the straight ahead position.
Adjust if necessary. See STEERING,
Adjustment.
![](/vehicles/onond/ycatth/que/etantom.png)
10
MAINTENANCE
14
MAINTENANCE
ENGINE OIL
WARNING: Avoid excessive skin contact
with used engine oil. Used engine oil
contains potentially harmful contaminants
which may cause skin cancer or other serious
skin disorders.
1. Remove underbelly panel. See CHASSIS AND
BODY, Repair.
2. Position suitable container beneath sump.
3. Clean arear around drain plug.
4. Remove oil drain plug, discard sealing washer.
5. Allow oil to drain.
6. Fit new sealing washer to oil drain plug.
7. Fit engine drain plug and tighten to 23 Nm (17
lbf.ft).
8. Fill engine with recommended grade of oil to
correct mark on dipstick. See LUBRICANTS,
FLUIDS AND CAPACITIES, Information.
9. Fit underbelly panel. See CHASSIS AND
BODY, Repair.
CENTRIFUGE ROTOR - Td5
1. Renew centrifuge rotor. See ENGINE , Repair.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст