Frelander 2. Manual — part 347
![](/vehicles/onond/oloi/toor/jud.png)
9.
CAUTION: Take care not to touch the printed
side of the printed circuit board (PCB).
9.
10.
CAUTION: Discard the component.
10.
11.
CAUTION: Discard the component.
11.
![](/vehicles/onond/oloi/toor/thead.png)
12.
CAUTION: Discard the component.
Remove and discard the selector lever assembly printed
circuit board.
12.
Installation
1.
![](/vehicles/onond/oloi/toor/hey.png)
2.
3.
CAUTION: Take care not to touch the printed
side of the printed circuit board (PCB).
3.
4. CAUTIONS:
Make sure the selector lever button is depressed
when installing the selector lever knob. Failure to
follow this instruction may result in damage to the
selector lever assembly.
Make sure the ribbon cable is routed in front of
the selector shaft.
4.
![](/vehicles/onond/oloi/toor/yoralouited.png)
5. NOTE: Make sure the cut out on the locking ring
faces towards the front of the vehicle.
Install the locking ring.
5.
Secure into the 3 clips.
6.
Switch the ignition on.
7.
Position the transmission selector lever into PARK.
8.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст