Frelander 2. Manual — part 345
![](/vehicles/onond/oloi/toor/xittheldoral.png)
Automatic Transmission/Transaxle External Controls - Selector Lever
Assembly
Removal and Installation
Removal
Remove the floor console.
Refer to:
Floor Console
(501-12 Instrument Panel and Console,
Removal and Installation).
1.
Position the transmission selector lever into PARK.
Depress and hold the selector cable ball joint release button,
using a lever carefully disconnect the cable.
Release the cable.
2.
Torque: 10 Nm
3.
Installation
To install, reverse the removal procedure.
1.
![](/vehicles/onond/oloi/toor/yont.png)
Automatic Transmission/Transaxle External Controls - Selector Lever Cable
Removal and Installation
Removal
CAUTION: Make sure that the selector lever and the gearshift mechanism are in the park (P) position.
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
1.
Remove the driveshaft.
Refer to:
Driveshaft - Vehicles W ithout: Diesel Particulate Filter
(DPF)
(205-01 Driveshaft, Removal and Installation).
2.
Remove the floor console.
Refer to:
Floor Console
(501-12 Instrument Panel and Console,
Removal and Installation).
3.
Remove the air cleaner assembly.
Refer to:
Air Cleaner
(303-12A Intake Air Distribution and Filtering -
I6 3.2L Petrol, Removal and Installation).
4.
Remove the instrument panel, lower trim panels.
5.
6.
![](/vehicles/onond/oloi/toor/chazama.png)
Remove the RH instrument pack lower bracket.
7.
8.
Position the transmission selector lever into
PARK.
9.
![](/vehicles/onond/oloi/toor/gherer.png)
Depress and hold the selector cable ball joint
release button, using a lever carefully
disconnect the cable.
Disconnect and remove the cable.
10.
Release the cable sealing plate.
11.
12.
13.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст