Discovery 2. Manual — part 242
SCREENS
REPAIRS
76-4-7
12. Position glass to body and align to reference
tape.
13. Lightly press glass to ensure correct profile.
14. Secure glass with tape until sealer has cured.
15. Remove protective covers and tape.
16. Test sealer for leaks, apply additional sealer if
necessary. If water is used, allow sealer to dry
before testing. Spray water around glass and
check for leaks. Mark any area that leaks. Dry
glass and sealer then apply additional sealer.
CAUTION: A curing time of 6 hours is
desirable. During this time leave a window
open to ventilate the vehicle interior. If the
vehicle must be used before the curing time
has elapsed, do not drive at speed or slam
the doors with the windows closed.
SEATS
DESCRIPTION AND OPERATION
76-5-1
SEATS
DESCRIPTION AND OPERATION
Electric seat component location
RHD shown, LHD similar
1 BCU
2 Drivers door switch
3 Power relay
4 Satellite fuse box
5 Switch pack
6 Fore/aft motor
7 Cushion front up/down motor
8 Cushion rear up/down motor
9 Squab fore/aft motor
10 Lumbar support bladder
11 Lumbar pump
SEATS
76-5-2
DESCRIPTION AND OPERATION
Electric seat block diagram
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст