Discovery 2. Manual — part 417
ENGINE - TD5
REPAIRS 12-1-65
7. Remove 3 bolts securing centrifuge to engine
oil cooler.
8. Remove centrifuge and discard 'O' ring.
9. Remove 2 bolts, remove drain pipe from
centrifuge and discard gasket.
Refit
1. Clean mating faces of centrifuge, oil cooler and
sump.
2. Position new gasket and fit oil drain pipe to
centrifuge, tighten bolts to 10 Nm (7 lbf.ft).
CAUTION: Gasket must be fitted dry.
3. Position new 'O' ring to oil cooler.
4. Position centrifuge to oil cooler housing and
tighten bolts to 25 Nm (18 lbf.ft).
5. Using a new gasket, align the centrifuge oil
drain pipe to sump and tighten bolts to 10 Nm
(7 lbf.ft).
CAUTION: Gasket must be fitted dry.
6. Models with air conditioning: Position A/C
compressor and tighten bolts to 25 Nm (18
lbf.ft).
7. Fit turbocharger.
8. Models with air conditioning: Fit auxiliary
REPAIRS, Belt - auxiliary drive.
9. Fit underbelly panel and secure with fixings.
10. Remove stand(s) and lower vehicle.
ENGINE - TD5
12-1-66 REPAIRS
Rotor - centrifuge
$% 12.60.91
Remove
1. Remove 2 bolts and remove centrifuge cover.
2. Remove and discard 'O' ring and rotor.
Refit
1. Clean centrifuge body and cover.
2. Fit new rotor.
3. Using a new 'O' ring, fit centrifuge cover and
tighten bolts to 10 Nm (7 lbf.ft).
Seal - oil - timing cover
$% 12.65.05
Remove
1. Remove crankshaft pulley.
ENGINE - Td5, REPAIRS, Pulley -
2. Position tool LRT-12-092 into crankshaft front
oil seal and discard seal.
Refit
1. Using a lint free cloth, thoroughly clean oil seal
recess and the running surface on crankshaft
pulley.
2. Position new seal into timing chain housing.
Drift seal into place using tool LRT-12-156.
CAUTION: Oil seal must be fitted dry.
ENGINE - TD5
REPAIRS 12-1-67
3. Remove tool LRT-12-156.
4. Fit crankshaft pulley.
ENGINE - TD5
12-1-68 REPAIRS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст