Jaguar XJ (X350). Manual — part 601
11 . Release the cooling system pressure.
Remove the coolant expansion tank pressure cap.
12
.
Top up the cooling system.
Fill the cooling system up to the MAX mark on the coolant expansion tank
using a fifty percent mixture of Jaguar Premium Cooling System Fluid or
equivalent, meeting Jaguar specification WSS M97B44-D and fifty percent
water.
13 . Install the coolant expansion tank pressure cap.
Water Pump - 3.0L, VIN Range: G00442-
>G45703 (26.50.01)
Removal
1
.
Remove fuse 14 from the engine compartment fuse box prior to performing any under hood
service in the area of the cooling fan.
2 . Drain the cooling system.
For additional information, refer to
3 . Lower the vehicle.
4 . Remove the air cleaner outlet pipe. <<303-12A>>
5
.
Remove the accessory drive belt.
1) Rotate the accessory drive belt tensioner counter-clockwise.
Use a 3/8 inch square drive bar to rotate the accessory drive belt
tensioner.
2) Remove the accessory drive belt.
6 . Remove the intake manifold support bracket.
www.
7 . Disconnect the radiator top coolant hose.
8 . Detach the coolant hose from the housing assembly.
9 . Disconnect the coolant hoses.
10 . Remove the hoses and thermostat housing assembly.
11 . Remove the coolant hose.
12 . Remove the coolant hose from the water pump to lower housing.
13 . Remove the water pump.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст