Toyota Camry (2018 year). Manual — part 20
90
2. Instrument cluster
Trip (after start)
Average fuel economy
*
Displays the average fuel con-
sumption since engine start.
Average vehicle speed
Displays the average vehicle
speed since engine start.
Elapsed time
Displays the time elapsed since
engine start.
*
: Use the displayed fuel consumption as a reference only.
■
Total (after reset)
Current fuel consumption
Displays the instantaneous cur-
rent fuel consumption.
Average fuel economy
*
1, 2
Displays the average fuel con-
sumption since the display was
reset.
Average vehicle speed/
Elapsed time
*
1
Displays the average vehicle speed since reset or elapsed time since
reset, as selected in
. (
*
1
: Pressing and holding
will reset the average fuel consumption
and average vehicle speed/elapsed time.
*
2
: Use the displayed fuel consumption as a reference only.
Drive information (
)
1
2
3
1
2
3
91
2. Instrument cluster
2
Instrum
e
nt clus
ter
Tank (after refuel)
Driving range
*
1, 2
Displays the driving range with
remaining fuel.
Average fuel economy
*
1, 3
Displays the average fuel con-
sumption since the vehicle was
refueled.
*
1
: When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.
*
2
: This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
*
3
: Use the displayed fuel consumption as a reference only.
■
Eco Driving Indicator
→P. 97
■
Speedometer
Displays the vehicle speed.
■
Tire pressure (vehicles with a tire inflation pressure display
function)
→P. 445
■
Blank (No items)
Displays no drive information contents.
1
2
92
2. Instrument cluster
Changing settings
Use the meter control switches on the steering wheel to change
settings.
Press
or
to select
.
Operate the switches to select a desired item.
Change the setting by referring to the message displayed on the
screen.
◆
Setting items
■
LDA (Lane Departure Alert with steering control)
(if equipped) (
The following LDA system settings can be changed:
Settings display (
)
1
2
3
Item
Settings
Details
Steering assist
On
Select to enable/disable steering
wheel assistance.
Off
Alert sensitivity
High
Select to set the warning sensi-
tivity.
Normal
Sway warning
On
Select to enable/disable the vehi-
cle sway warning.
Off
Sway sensitivity
High
Select to set the vehicle sway
warning sensitivity.
Medium
Low
93
2. Instrument cluster
2
Instrum
e
nt clus
ter
PCS (Pre-Collision System) (if equipped) (
The following pre-collision system settings can be changed:
■
BSM (Blind Spot Monitor) function (if equipped) (
→P. 300)
■
RCTA (Rear Cross Traffic Alert) function (if equipped)
(
Item
Settings
Details
PCS
On
Select to enable/disable the pre-
collision system.
Off
Warning sensitivity
Select to change the warning
timing.
Item
Settings
Details
BSM
On
Select to enable/disable the
Blind Spot Monitor function.
Off
Item
Settings
Details
RCTA
On
Select to enable/disable the Rear
Cross Traffic Alert function.
Off
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст