Toyota Camry (2018 year). Manual — part 23
102
2. Instrument cluster
Fuel consumption
Current fuel consumption
Displays the instantaneous cur-
rent fuel consumption.
Average fuel economy (after
start)
Displays the average fuel con-
sumption since engine start.
*
1
Driving range
Displays the driving range with remaining fuel.
*
2, 3
Gadget
*
4
The following items can be displayed by changing the settings for gad-
get content and fuel economy type on
. (
Eco-friendly driving information (
)
1
2
3
4
Displayable item
Content
Gadget
content
Fuel economy
type
Average
vehicle
speed
Trip
(after start)
Displays the average vehicle speed since
engine start.
Total
(after reset)
Displays the average vehicle speed since the
display was reset.
*
5
Distance
Trip
(after start)
Displays the distance driven since vehicle
start.
Total
(after reset)
Displays the distance driven since the display
was reset.
*
5
Elapsed
time
Trip
(after start)
Displays the elapsed time since engine start.
Total
(after reset)
Displays the elapsed time since the display
was reset.
*
5
103
2. Instrument cluster
2
Instrum
e
nt clus
ter
Displayed item (listed below) can be changed on the fuel economy type
screen of
. (
● Total (after reset)
Displays the average fuel consumption since the display was reset.
*
1, 5
● Tank (after refuel)
Displays the average fuel consumption since the vehicle was refu-
eled.
*
1, 2
*
1
: Use the displayed fuel consumption as a reference only.
*
2
: When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.
*
3
: This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
*
4
: The default setting is no display.
*
5
: This display can be reset by pressing and holding
while it is dis-
played.
■
Eco indicator
• Eco Driving Indicator
• Driving range
Displays the driving range with remaining fuel.
When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.
This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
5
104
2. Instrument cluster
Changing settings
Use the meter control switches on the steering wheel to change
settings.
Press
or
to select
.
Operate the switches to select a desired item.
Press or press and hold
.
The available settings will differ depending on if
is pressed or
pressed and held. Follow the instructions on the display.
◆
Setting items
■
LDA (Lane Departure Alert with steering control) (
→P. 253)
Press and hold
to change the settings of the following items:
Settings display (
)
1
2
3
Item
Settings
Details
Steering assist
On
Select to enable/disable steering
wheel assistance.
Off
Alert sensitivity
High
Select to set the warning sensi-
tivity.
Normal
Sway warning
On
Select to enable/disable the vehi-
cle sway warning.
Off
Sway sensitivity
High
Select to set the vehicle sway
warning sensitivity.
Medium
Low
105
2. Instrument cluster
2
Instrum
e
nt clus
ter
PCS (Pre-Collision System) (
→P. 242)
Press and hold
to change the settings of the following items:
■
BSM (Blind Spot Monitor) (if equipped) (
Press
to enable/disable the Blind Spot Monitor function.
Press and hold
to change the settings of the following item:
Item
Settings
Details
PCS
On
Select to enable/disable the pre-
collision system.
Off
Warning sensitivity
Select to change the warning
timing.
Item
Settings
Details
BSM
On
Select to enable/disable the
Blind Spot Monitor function.
Off
Item
Settings
Details
Outside rear view
mirror indicator
brightness
Bright
Select to change the brightness
of the outside rear view mirror
indicators.
Dim
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст