Toyota Sequoia (2005). Manual — part 503
–
DIAGNOSTICS
DRIVER DOOR CONTROL SYSTEM
DI–1807
2001
3
Check wire harness and connector between driver door ECU and body ground
(See page
).
NG
Repair or replace wire harness or connector.
OK
4
Check wire harness and connector between passenger door ECU and body
ground (See page
).
NG
Repair or replace wire harness or connector.
OK
Proceed to next circuit inspection shown in
problem symptoms table (See page
).
I28455
R17
Remote Control Mirror LH
D22
Driver Door ECU
DM+R
DMVR
DMHR
M+
MV
MH
L–W
BR–B
BR–R
7
6
8
15
17
16
DI–1808
–
DIAGNOSTICS
DRIVER DOOR CONTROL SYSTEM
2002
Remote control mirror motor LH circuit (w/ Driving position
memory)
CIRCUIT DESCRIPTION
SEQUOIA features a driving position memory function, and up to 2 driver positions can be memorized.
The driver door ECU operates 2 motors built into the remote control mirror. The motors move the mirror to
the memorized positions based on information from the position sensor.
WIRING DIAGRAM
DIDEP–01
–
DIAGNOSTICS
DRIVER DOOR CONTROL SYSTEM
DI–1809
2003
INSPECTION PROCEDURE
1
Check remote control mirror motor (See page
NG
Replace remote control mirror motor.
OK
2
Check wire harness and connector between remote control mirror motor and
driver door ECU (See page
NG
Repair or replace harness or connector.
OK
Proceed to next circuit inspection shown in
problem symptoms table (See page
).
DI–1810
–
DIAGNOSTICS
DRIVER DOOR CONTROL SYSTEM
2004
Remote control mirror position sensor LH circuit (w/ Driving posi-
tion memory)
CIRCUIT DESCRIPTION
SEQUOIA features a driving position memory function, and up to 2 driver positions can be memorized.
The driver door ECU operates 2 motors built into the remote control mirror. The motors move the mirror to
the memorized positions based on information from the position sensor.
DIDEQ–01
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст