Toyota Sequoia (2005). Manual — part 719
IG08Q–06
B07248
Ignition Coil (with Igniter) Connector
Ignition Coil (with Igniter)
N·m (kgf·cm, ft·lbf) : Specified torque
7.5 (76, 66 in.·lbf)
IG–4
–
IGNITION
IGNITION COIL
2865
IGNITION COIL
COMPONENTS
IG08R–05
B04085
–
IGNITION
IGNITION COIL
IG–5
2866
REMOVAL
1.
DISCONNECT IGNITION COIL (WITH IGNITER) CON-
NECTORS
2.
REMOVE IGNITION COILS (WITH IGNITER)
Remove the bolt, and pull out the ignition coil (with igniter). Re-
move the 8 ignition coils (with igniter).
IG0EN–04
B04085
IG–6
–
IGNITION
IGNITION COIL
2867
INSTALLATION
1.
INSTALL IGNITION COILS (WITH IGNITER)
Install the ignition coil (with igniter) with the bolt. Install the 8
ignition coils (with igniter).
Torque: 7.5 N·m (76 kgf·cm, 66 in.·lbf)
2.
CONNECT IGNITION COIL (WITH IGNITER) CONNEC-
TORS
IG08T–08
B17486
Drive Belt
Camshaft Position
Sensor Connector
Grommet
Engine Wire
Camshaft Position Sensor
Oil Cooler Pipe
LH No.3 Timing Belt Cover
–
IGNITION
CAMSHAFT POSITION SENSOR
IG–7
2868
CAMSHAFT POSITION SENSOR
COMPONENTS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст