Toyota Highlander (2018 year). Manual — part 169
![](/vehicles/linovind/ebe/quyos/xxe.png)
688
9-2. Customization
■
Moon roof
*
(
*
: If equipped
■
Turn signal lever (
*
1
: After flashing the turn signal lights when turning left or right while this func-
tion is off and the turn signal lever is moved to the first position in the direc-
tion of the flashing light, the turn signal lights can be selected to be flashing
or off.
*
2
: The turn signal lights will be off if the turn signal lever is moved to the first
position in the direction of flashing light.
Function
Default setting
Customized set-
ting
Linked operation of com-
ponents when mechani-
cal key is used (open
only)
Slide only
Tilt only
— — O
Linked operation of com-
ponents when wireless
remote control is used
Slide only
Tilt only
— — O
1 2 3
Function
Default setting
Customized set-
ting
The number of times the
turn signal lights flash
automatically when the
turn signal lever is
moved to the first posi-
tion during a lane
change
*
1
3
Off
*
2
— — O
4 to 7
1 2 3
![](/vehicles/linovind/ebe/quyos/hune.png)
689
9-2. Customization
9
Vehi
cl
e specificatio
ns
■
Automatic light control system (
■
Lights (
*
: U.S.A. only
■
Intuitive parking assist
*
1
(Refer to “NAVIGATION AND MULTI-
MEDIA SYSTEM OWNER’S MANUAL”)
*
1
: If equipped
*
2
: When intuitive parking assist is operating.
■
Automatic air conditioning system
*
(
*
: If equipped
Function
Default setting
Customized set-
ting
Light sensor sensitivity
Standard
-2 to 2
O — O
Time elapsed before
headlights automatically
turn off after doors are
closed
30 seconds
Off
O — O
60 seconds
90 seconds
1 2 3
Function
Default setting
Customized set-
ting
Daytime running light
system
*
On
Off
O — O
1 2 3
Function
Default setting
Customized set-
ting
Detection distance of the
rear center sensor
Far
Near
O — O
Buzzer volume
Level 3
Level 1 to 5
O — O
Display setting
*
2
All sensors dis-
played
Display off
O — O
1 2 3
Function
Default setting
Customized set-
ting
A/C auto switch opera-
tion
On
Off
O — O
1 2 3
![](/vehicles/linovind/ebe/quyos/ldongorin.png)
690
9-2. Customization
■
Illumination (
*
1
: Vehicles with a smart key system
*
2
: Vehicles with driving position memory
■
Seat belt reminder (
→P. 582)
Function
Default setting
Customized set-
ting
Time elapsed before the
interior lights turn off
15 seconds
Off
O — O
7.5 seconds
30 seconds
Operation after the
engine switch is turned
off
On
Off
— — O
Operation when the
doors are unlocked
On
Off
— — O
Operation when you
approach the vehicle
with the electronic key
on your person
*
1
On
Off
— — O
Ambient lights
*
2
On
Off
— — O
Time elapsed before the
outer foot lights turn
off
*
2
15 seconds
Off
O — O
7.5 seconds
30 seconds
Operation of the outer
foot lights when you
approach the vehicle
with the electronic key
on your person
*
2
On
Off
— — O
Operation of the outer
foot lights when the
doors are unlocked
*
2
On
Off
— — O
1 2 3
Function
Default setting
Customized set-
ting
Vehicle speed linked
seat belt reminder
buzzer
On
Off
— — O
1 2 3
![](/vehicles/linovind/ebe/quyos/nla.png)
691
9-2. Customization
9
Vehi
cl
e specificatio
ns
■
Vehicle customization
●
When the smart key system is off, the entry unlock function cannot be cus-
tomized.
●
When the doors remain closed after unlocking the doors and the timer acti-
vated automatic door lock function activates, signals will be generated in
accordance with the operation buzzer volume and operational signal (Emer-
gency flashers) function settings.
■
Changing of the power back door opening angle (if equipped)
The opening angle setting can be changed through operation of either the
power back door switch or the audio system screen.
However, if the engine switch is on and the power back door switch is used to
change the opening angle setting, the changed opening angle will not be
reflected on the audio system screen until the engine switch is turned off and
then on again.
■
When customizing on the audio system screen
Stop the vehicle in a safe place, apply the parking brake, and shift the shift
lever to P. Also, to prevent battery discharge, leave the engine running while
customizing the features.
WARNING
■
During customization
As the engine needs to be running during customization, ensure that the
vehicle is parked in a place with adequate ventilation. In a closed area such
as a garage, exhaust gases including harmful carbon monoxide (CO) may
collect and enter the vehicle. This may lead to death or a serious health
hazard.
NOTICE
■
During customization
To prevent battery discharge, ensure that the engine is running while cus-
tomizing features.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст