Kia Carnival (2007 year). Manual — part 103
2007 > 2.7L V6 GASOLINE >
REPLACEMENT
1. Remove the battery and air cleaner. (see "Transaxle range switch replacement")
2. Remove the output shaft speed sensor(A).
(1) Disconnect the output shaft speed sensor connector(B).
(2) Remove the bolt(C).
(3) Inspect the output shaft speed sensor bore.
3. Apply a light coat of automatic transaxle fluid to the O-ring seal before installation.
4. Installation is the reverse of removal.
Transaxle Oil Temperature
Sensor
2007 > 2.7L V6 GASOLINE >
DESCRIPTION
Oil Temperature Sensor
The oil temperature sensor is of the thermistor type, and senses the automatic transaxle fluid temperature. Using the
signal from this sensor, TCM(PCM) controls the shift pattern optimally during shift. In order to operate the damper
clutch, this signal is also referred.
- Range of temperature : -40°C~145°C
- Type: Separated type (High / Low temperature)
- Standard value of internal resistance
Temp.[°C(°F)]
Resistance(k
Ω)
Temp.[°C(°F)]
Resistance(k
Ω)
-40(-40)
139.5
80(176)
1.08
-20(-4)
47.7
100(212)
0.63
0(32)
18.6
120(248)
0.38
20(68)
8.1
140(284)
0.25
40(104)
3.8
160(320)
0.16
60(140)
1.98
2007 > 2.7L V6 GASOLINE >
REPLACEMENT
1. Remove the automatic transaxle assembly.
2. Remove the valve body cover(refer to the overhaul manual).
3. Disconnect the oil temperature sensor connector.
4. Remove the oil temperature sensor(B), loosening the mounting bolt(A).
5. Replace the sensor with the new one and reassemble the rest of the parts.
INSPECTION
1. Remove the oil temperature sensor(A).
2. Measure the resistance between the terminal 1 and 2 of the sensor connector.
Temp.[°C(°F)]
Resistance(K
Ω)
0(32)
100(212)
18.6
0.63
3. If the value is out of the specfication, replace the oil temperature sensor.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст