Kia Carnival (2007 year). Manual — part 539

Do not reuse cylinder head cover gasket.

(5) Install the ignition coil.

(6) Connect the RH ignition coil connector (A), the condenser connector (B) and install the wiring bracket (C).

(7) Install the connector bracket (A) to the LH cylinder head cover.

31. Install the surge tank and wiring connectors.

(1) Install the surge tank (A).

Tightening torque :
9.80 ~ 11.76N.m (1.0 ~ 1.2kgf.m, 7.23 ~ 8.68lb-ft)

(2) Install the connector bracket (A) to the surge tank.

Tightening torque :
6.86 ~ 10.78N.m (0.7 ~ 1.1kgf.m, 5.06 ~ 7.96lb-ft)

(3) Install the surge tank stay.

Tightening torque :
27.44 ~ 31.36N.m (2.8 ~ 3.2kgf.m, 20.25 ~ 23.14lb-ft)

(4) Connect the brake vacuum hose.

(5) Connect the PCV hose (C).

(6) Connect the water hoses (B) to the ETC.

(7) Install the ETC bracket (A).

(8) Connect the LH CMPS connector (A) and oil pressure switch connector(B).

(9) Install the wiring harness protector (E) and connect the LH ignition coil connector (A), injector connector (B),

condenser connector (C) and ground (D).

(10) Connect the LH front oxygen sensor connector (A).

(11) Connect the OCV connector (A) and knock sensor connector (B).

(12) Connect the ETC connector (A) and knock sensor connector (B).

(13) Connect the PCSV connector (A), MAP sensor connector (B) and PCSV hose.

(14) Connect the RH injector connector (A) and ignition coil connector (B).

(15) Connect the RH oxygen sensor connector (A) and tighten the power steering hose mounting bolts (B).

32. Install the engine mounting bracket (A).

Tightening torque :