Nissan Murano. Manual — part 1125
PWC-38
< ECU DIAGNOSIS INFORMATION >
BCM (BODY CONTROL MODULE)
RKE-MODE CHG
LOCK/UNLOCK button of Intelligent Key is not pressed and held si-
multaneously
Off
LOCK/UNLOCK button of Intelligent Key is pressed and held simul-
taneously
On
OPTICAL SENSOR
Bright outside of the vehicle
Close to 5 V
Dark outside of the vehicle
Close to 0 V
REQ SW -DR
Driver door request switch is not pressed
Off
Driver door request switch is pressed
On
REQ SW -AS
Passenger door request switch is not pressed
Off
Passenger door request switch is pressed
On
REQ SW -RR
NOTE:
The item is indicated, but not monitored.
Off
REQ SW -RR
NOTE:
The item is indicated, but not monitored.
Off
REQ SW -BD/TR
Back door request switch is not pressed
Off
Back door request switch is pressed
On
PUSH SW
Push-button ignition switch (push switch) is not pressed
Off
Push-button ignition switch (push switch) is pressed
On
IGN RLY2 -F/B
Ignition switch in OFF or ACC position
Off
Ignition switch in ON position
On
ACC RLY -F/B
NOTE:
The item is indicated, but not monitored.
Off
CLUCH SW
NOTE:
The item is indicated, but not monitored.
Off
BRAKE SW 1
The brake pedal is depressed when No. 7 fuse is blown
Off
The brake pedal is not depressed when No. 7 fuse is blown, or No.
7 fuse is normal
On
BRAKE SW 2
The brake pedal is not depressed
Off
Stop lamp switch 1 signal circuit is normal
On
DETE/CANCL SW
Selector lever in P position
Off
Selector lever in any position other than P
On
SFT PN/N SW
Selector lever in any position other than P and N
Off
Selector lever in P or N position
On
S/L -LOCK
NOTE:
The item is indicated, but not monitored.
Off
S/L -UNLOCK
NOTE:
The item is indicated, but not monitored.
Off
S/L RELAY-F/B
NOTE:
The item is indicated, but not monitored.
Off
UNLK SEN -DR
Driver door is unlocked
Off
Driver door is locked
On
PUSH SW -IPDM
Push-button ignition switch (push-switch) is not pressed
Off
Push-button ignition switch (push-switch) is pressed
On
IGN RLY1 -F/B
Ignition switch in OFF or ACC position
Off
Ignition switch in ON position
On
DETE SW -IPDM
Selector lever in any position other than P
Off
Selector lever in P position
On
Monitor Item
Condition
Value/Status
BCM (BODY CONTROL MODULE)
PWC-39
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
SFT PN -IPDM
Selector lever in any position other than P and N
Off
Selector lever in P or N position
On
SFT P -MET
Selector lever in any position other than P
Off
Selector lever in P position
On
SFT N -MET
Selector lever in any position other than N
Off
Selector lever in N position
On
ENGINE STATE
Engine stopped
Stop
While the engine stalls
Stall
At engine cranking
Crank
Engine running
Run
S/L LOCK-IPDM
NOTE:
The item is indicated, but not monitored.
Off
S/L UNLK-IPDM
NOTE:
The item is indicated, but not monitored.
Off
S/L RELAY-REQ
NOTE:
The item is indicated, but not monitored.
Off
VEH SPEED 1
While driving
Equivalent to speed-
ometer reading
VEH SPEED 2
While driving
Equivalent to speed-
ometer reading
DOOR STAT-DR
Driver door is locked
LOCK
Wait with selective UNLOCK operation (5 seconds)
READY
Driver door is unlocked
UNLOCK
DOOR STAT-AS
Passenger door is locked
LOCK
Wait with selective UNLOCK operation (5 seconds)
READY
Passenger door is unlocked
UNLOCK
ID OK FLAG
Power supply position in LOCK position
Reset
Power supply position in any position other than LOCK
Set
PRMT ENG STRT
The engine start is prohibited
Reset
The engine start is permitted
Set
PRMT RKE STRT
NOTE:
The item is indicated, but not monitored.
Reset
KEY SW -SLOT
Intelligent Key is not inserted into key slot
Off
Intelligent Key is inserted into key slot
On
RKE OPE COUN1
During the operation of Intelligent Key
Operation frequency of
Intelligent Key
RKE OPE COUN2
NOTE:
The item is indicated, but not monitored.
—
CONFRM ID ALL
The Intelligent Key ID that the key slot receives is not recognized by
any Intelligent Key ID registered to BCM.
Yet
The Intelligent Key ID that the key slot receives is recognized by any
Intelligent Key ID registered to BCM.
Done
CONFIRM ID4
The Intelligent Key ID that the key slot receives is not recognized by
the fourth Intelligent Key ID registered to BCM.
Yet
The Intelligent Key ID that the key slot receives is recognized by the
fourth Intelligent Key ID registered to BCM.
Done
Monitor Item
Condition
Value/Status
PWC-40
< ECU DIAGNOSIS INFORMATION >
BCM (BODY CONTROL MODULE)
CONFIRM ID3
The Intelligent Key ID that the key slot receives is not recognized by
the third Intelligent Key ID registered to BCM.
Yet
The Intelligent Key ID that the key slot receives is recognized by the
third Intelligent Key ID registered to BCM.
Done
CONFIRM ID2
The Intelligent Key ID that the key slot receives is not recognized by
the second Intelligent Key ID registered to BCM.
Yet
The Intelligent Key ID that the key slot receives is recognized by the
second Intelligent Key ID registered to BCM.
Done
CONFIRM ID1
The Intelligent Key ID that the key slot receives is not recognized by
the first Intelligent Key ID registered to BCM.
Yet
The Intelligent Key ID that the key slot receives is recognized by the
first Intelligent Key ID registered to BCM.
Done
TP 4
The ID of fourth Intelligent Key is not registered to BCM
Yet
The ID of fourth Intelligent Key is registered to BCM
Done
TP 3
The ID of third Intelligent Key is not registered to BCM
Yet
The ID of third Intelligent Key is registered to BCM
Done
TP 2
The ID of second Intelligent Key is not registered to BCM
Yet
The ID of second Intelligent Key is registered to BCM
Done
TP 1
The ID of first Intelligent Key is not registered to BCM
Yet
The ID of first Intelligent Key is registered to BCM
Done
AIR PRESS FL
Ignition switch ON (Only when the signal from the transmitter is re-
ceived)
Air pressure of front LH
tire
AIR PRESS FR
Ignition switch ON (Only when the signal from the transmitter is re-
ceived)
Air pressure of front
RH tire
AIR PRESS RR
Ignition switch ON (Only when the signal from the transmitter is re-
ceived)
Air pressure of rear RH
tire
AIR PRESS RL
Ignition switch ON (Only when the signal from the transmitter is re-
ceived)
Air pressure of rear LH
tire
ID REGST FL1
ID of front LH tire transmitter is registered
Done
ID of front LH tire transmitter is not registered
Yet
ID REGST FR1
ID of front RH tire transmitter is registered
Done
ID of front RH tire transmitter is not registered
Yet
ID REGST RR1
ID of rear RH tire transmitter is registered
Done
ID of rear RH tire transmitter is not registered
Yet
ID REGST RL1
ID of rear LH tire transmitter is registered
Done
ID of rear LH tire transmitter is not registered
Yet
WARNING LAMP
Tire pressure indicator OFF
Off
Tire pressure indicator ON
On
BUZZER
Tire pressure warning alarm is not sounding
Off
Tire pressure warning alarm is sounding
On
Monitor Item
Condition
Value/Status
BCM (BODY CONTROL MODULE)
PWC-41
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
TERMINAL LAYOUT
PHYSICAL VALUES
JPMIA0062ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст