Chery Tiggo 5 (T21). Service manual — part 135
1
09
SQR484F EMISSION CONTROL SYSTEM
Description 09-3
Specifications 09-4
Tool 09-4
Circuit Diagram
Activated Charcoal Canister Inspection 09-6
Fuel Tank Cap Assembly Inspection
Activated Charcoal Canister Solenoid
Removal 09-7
Inspection 09-8
Installation 09-8
Activated Charcoal Canister Assembly 09-9
Removal 09-9
Installation 09-10
Removal 09-11
Inspection 09-11
Installation 09-12
2
09
09–
3
09
SQR484F EMISSION CONTROL SYSTEM
GENERAL INFORMATION
Description
Emission control system recovers and burns fuel vapor to prevent the vapor in fuel tank from being
discharged into the atmosphere. It monitors the oxygen content in exhaust gas, so as to guarantee the
maximum efficiency of catalyst assembly in converting the HC, CO and NOx in exhaust gas.
Activated charcoal canister assembly plays an important role in the emission control system. The activated
charcoal canister assembly can be used to absorb and filter moisture and fuel vapor. Fresh air enters the
bottom of activated charcoal canister assembly while fuel vapor enters the top of activated charcoal canister
through pipe. When engine stops operating, the fuel vapor and fresh air will be stored in the activated
charcoal canister assembly. When canister solenoid valve opens, the fuel vapor will enter intake manifold to
burn.
1 - Fuel Tank Assembly
2 - Activated Charcoal Canister Solenoid Valve
3 - PCV Valve
4 - Activated Charcoal Canister Assembly
RT21090010
MAX
MAX
MIN
MIN
1
2
3
4
09–
4
09
Oxygen sensor consists of upstream oxygen sensor and downstream oxygen sensor. Upstream oxygen
sensor is installed on the upper part of precatalytic converter assembly, and downstream oxygen sensor is
installed on the lower part of precatalytic converter assembly. The oxygen sensor can detect the oxygen
content in exhaust gas, and determine whether combustible air-fuel mixture is completely burnt out or not, so
as to guarantee the maximum efficiency of catalyst assembly in converting the HC, CO and NOx in exhaust
gas.
Specifications
Torque Specifications
Tool
General Tool
Description
Torque (N·m)
Activated Charcoal Canister Solenoid Valve Bracket
Fixing Bolt
7 ± 1
Coupling Bolt Between Activated Charcoal Canister
Assembly and Body
7 ± 1
Exhaust Manifold Heat Insulator Fixing Bolt
23 ± 2
Upstream Oxygen Sensor
40 - 60
Downstream Oxygen Sensor
40 - 60
Digital Multimeter
RCH0000002
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст