Jaguar XJ (X350). Service manual — part 1417
![](/vehicle/yohir/vahe/meloningh/mer.png)
6 . Remove the front seat backrest trim panel.
7 . Detach the front seat backrest cover.
8 . Detach the lumbar motor.
9 . Remove the folding tray.
![](/vehicle/yohir/vahe/meloningh/quvee.png)
10 . Remove the folding tray striker retaining screw cover.
11 . Remove the folding tray striker.
12 . NOTE:
Left-hand shown, right-hand similar.
Remove the retaining bolt.
13 . Remove the folding tray work surface.
www.
![](/vehicle/yohir/vahe/meloningh/dong.png)
14 . Remove the folding tray finish panel.
Remove the securing screws.
15 . NOTE:
The folding tray finish panel gaskets are handed.
Remove and discard the folding tray finish panel gasket.
Installation
1 . NOTE:
Install new folding tray finish panel gaskets.
To install, reverse the removal procedure.
Tighten to 5 Nm.
![](/vehicle/yohir/vahe/meloningh/hers.png)
2 . Tighten to 2 Nm.
3 . Tighten to 2 Nm.
4 . Tighten to 1 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст