Jaguar XJ (X350). Service manual — part 461
9 . NOTE:
Left-hand shown, right-hand similar.
Remove the secondary timing chain tensioner.
1) Reposition the exhaust camshaft sprocket and secondary timing chain.
2) Remove the secondary timing chain tensioner.
Installation
1 . NOTE:
Left-hand shown, right-hand similar.
Install the secondary timing chain tensioner.
1) Install the secondary timing chain tensioner.
2) Reposition the exhaust camshaft sprocket and secondary timing chain.
2 . NOTE:
Left-hand shown, right-hand similar.
Install the secondary timing chain tensioner retaining bolts.
Tighten to 12 Nm.
3 . Release the tension in the secondary timing chain tensioner.
Remove the retaining tool.
4 .
CAUTION: Make sure that a new bolt is installed.
NOTE:
Left-hand shown, right-hand similar.
Using the special tools, install the exhaust camshaft sprocket retaining bolt.
Tighten to 20 Nm + 90 deg.
www.
5 . NOTE:
Left-hand shown, right-hand similar.
Remove the special tool.
6 . Install the valve cover.
For additional information, refer to Valve Cover LH - VIN Range: G00442->G45703 (12.29.43)
For additional information, refer to Valve Cover LH - VIN Range: G45704->G99999 (12.29.43)
For additional information, refer to Valve Cover RH - VIN Range: G00442->G45703 (12.29.44)
For additional information, refer to Valve Cover RH - VIN Range: G45704->G99999 (12.29.44)
7 . Remove the special tool.
8 . Install the CKP sensor.
9 . Connect the crankshaft position (CKP) sensor electrical connector.
10 . Install the air deflector.
For additional information, refer to Air Deflector (76.11.41)
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст