Jaguar XJ (X350). Service manual — part 460
31 . Install the oil strainer.
Install new O-ring seals.
Tighten to 12 Nm.
32 . Install the oil pan.
For additional information, refer to Oil Pan (12.60.44)
Secondary Timing Chain Tensioner
Special Service Tools
12mm Ribe bit socket
303-1077A
Camshaft setting tool
303-530
Timing chain tensioning tool
303-532
Crankshaft setting, main tool
303-645
Removal
1 . Remove the air deflector.
For additional information, refer to Air Deflector (76.11.41)
2 . Disconnect the crankshaft position (CKP) sensor electrical connector.
www.
3 . Remove the CKP sensor.
4 . Install the special tool.
5 . Remove the valve cover.
For additional information, refer to Valve Cover LH - VIN Range: G00442->G45703 (12.29.43)
For additional information, refer to Valve Cover LH - VIN Range: G45704->G99999 (12.29.43)
For additional information, refer to Valve Cover RH - VIN Range: G00442->G45703 (12.29.44)
For additional information, refer to Valve Cover RH - VIN Range: G45704->G99999 (12.29.44)
6 . NOTE:
Left-hand shown, right-hand similar.
Install the special tool to the left-hand cylinder head.
7 . NOTE:
Left-hand shown, right-hand similar.
Using the special tool, remove the exhaust camshaft sprocket retaining bolt.
8 . NOTE:
Left-hand shown, right-hand similar.
Remove the secondary timing chain tensioner retaining bolts.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст