Jaguar XJ (X350). Service manual — part 285
![](/vehicle/yohir/vahe/souieto/zyme.png)
2 . NOTE:
Apply a thin film of lubricant to the steering gear bush.
Using the special tools, install the steering gear upper bush.
3 . Install the steering gear.
Tighten to 100 Nm.
4 . Attach the lower steering column.
![](/vehicle/yohir/vahe/souieto/flistuth.png)
Install the steering gear shaft pinch bolt.
Tighten to 35 Nm.
5 . Connect the power steering control valve actuator electrical connector.
6 . Install the air deflector.
www.
![](/vehicle/yohir/vahe/souieto/ofon.png)
211-03 : Steering linkage
Specifications
Specifications
Torque Specifications
Description
Nm lb-ft lb-in
Tie-rod end retaining nut 75 55 -
Tie-rod end lock nut
55 41 -
![](/vehicle/yohir/vahe/souieto/ovedou.png)
Description and operation
Steering Linkage
Item Part Number
Description
1
—
Tie-rod end retaining nut
2
—
Tie-rod end
3
—
Tie-rod end lock nut
4
—
Tie-rod
5
—
Tie-rod end boot
The left and right-hand tie-rod assemblies:
•
Transmit steering forces from the steering gear to the wheel knuckles.
•
Provide front road wheel toe setting by adjustment of the threaded outer tie-rod ends.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст