Jaguar XJ (X350). Service manual — part 286
Steering geometry adjustments must only be carried out with the vehicle on turn plates to
allow the wheels to move during adjustment.
The left and right-hand steering rack boots:
•
Are installed between the steering rack and the tie-rod ends.
•
Are of the concertina type.
•
Are to prevent the ingress of foreign matter.
NOTE:
Diagnosis and testing
Steering Linkage
For additional information, refer to
<<211-00>>
www.
Removal and installation
Steering Gear Boot (57.10.29)
Removal
1 . Remove the tie rod end.
For additional information, refer to
2 . Remove and discard the tie-rod boot outer retaining clamp.
3 . Remove and discard the tie-rod boot inner retaining clamp.
4
.
CAUTION: Make sure the area is washed down thoroughly before removing the
steering gear boot.
Remove the tie-rod boot.
Installation
1 .
CAUTION: Make sure the tie-rod is clean before installing the steering gear boot.
NOTE:
Install new retaining clamps.
To install, reverse the removal procedure.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст