Jaguar XJ (X350). Service manual — part 170
CAUTION: Make sure the brake disc faces are clean before installation.
NOTE:
Left-hand shown, right-hand similar.
Install the brake pad.
Using a suitable tool, fully retract the brake caliper piston.
2 . NOTE:
Make sure the brake pad is correctly installed to the caliper piston.
NOTE:
Left-hand shown, right-hand similar.
Install the brake pad to the caliper piston.
3 . NOTE:
Left-hand shown, right-hand similar.
Install the brake caliper.
4 . NOTE:
Left-hand shown, right-hand similar.
Install the brake caliper retaining bolts.
Tighten to 28 Nm.
5 . NOTE:
Left-hand shown, right-hand similar.
Install the brake caliper retaining bolt dust covers.
www.
6 . NOTE:
Left-hand shown, right-hand similar.
Attach the brake hose.
Install new sealing washers.
Tighten to 35 Nm.
7 . NOTE:
Left-hand shown, right-hand similar.
Install the anti-rattle spring.
8 . Remove the brake pedal hold-down tool.
9
.
Bleed the brake system.
For additional information, refer to
Brake System Bleeding - VIN Range: G45704->H99999
(70.25.03)
10 . Install both front wheels and tires.
For additional information, refer to
Wheel and Tire (74.20.05)
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст