Jaguar XJ (X350). Service manual — part 168
Diagnosis and testing
Front Disc Brake
For additional information, refer to
<<206-00>>
.
Removal and installation
Brake Caliper - Vehicles With: Standard
Brakes, VIN Range: G00442->G45703
(70.55.02)
Special Service Tools
Brake pedal hold-down tool
JDS 9013
Removal
1 . Remove the brake pads.
For additional information, refer to
2
.
CAUTION: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with
the eyes. Wash hands thoroughly after handling, as prolonged contact may cause irritation
and dermatitis. If brake fluid contacts the eyes, flush the eyes with cold water or eyewash
solution and seek medical attention. If taken internally do not induce vomiting, seek
immediate medical attention. Failure to follow these instructions may result in personal
injury.
CAUTION: If brake fluid comes into contact with the paintwork, the affected area
must be immediately washed down with cold water.
CAUTION: The brake caliper must be supported at all times.
www.
CAUTION: Cap the brake hose to prevent loss of fluid and dirt ingress.
NOTE:
To prevent the loss of brake fluid, apply the brake pedal hold-down tool and adjust to
hold the brake pedal down 40 mm (1.6 in).
Detach the brake hose.
Remove and discard the sealing washers.
3 . Remove the brake caliper.
Remove and discard the brake caliper upper retaining bolt.
Installation
1
.
CAUTION: If brake fluid comes into contact with the paintwork, the affected area
must be immediately washed down with cold water.
Install the brake caliper.
Install a new brake caliper upper retaining bolt.
Tighten to 34 Nm.
2 . Attach the brake hose.
Install new sealing washers.
Tighten to 35 Nm.
3 . Remove the brake pedal hold-down tool.
4 . Install the brake pads.
For additional information, refer to
5 . Bleed the brake system.
For additional information, refer to
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст