Nissan Qashqai (2007-2010). Manual — part 2007
BODY MAINTENANCE
MA-67
< ON-VEHICLE MAINTENANCE >
C
D
E
F
G
H
I
J
K
L
M
B
MA
N
O
A
PROTECTORS
Damage or condition of mudguard, fender protector, chipping protector, etc.
ANTI-CORROSION MATERIALS
Damage or separation of anti-corrosion materials under the body.
DRAIN HOLES
Condition of drain holes at door and side sill. When repairing corroded areas, refer to the Corrosion Repair
Manual.
MA-68
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
DRIVE BELTS (HR16DE)
DRIVE BELTS (HR16DE) : Drive Belts
INFOID:0000000001095805
BELT DEFLECTION:
*: When engine is cold.
BELT TENSION AND FREQUENCY:
*: When engine is cold.
DRIVE BELTS (MR20DE)
DRIVE BELTS (MR20DE) : Drive Belt
INFOID:0000000001095807
DRIVE BELT
DRIVE BELTS (K9K)
DRIVE BELTS (K9K) : Drive Belt
INFOID:0000000001095809
DRIVE BELT
ENGINE COOLANT (HR16DE)
ENGINE COOLANT (HR16DE) : Periodical Maintenance Specification
INFOID:0000000001095810
ENGINE COOLANT CAPACITY (APPROXIMATE)
Unit:
(Imp qt)
Location
Deflection adjustment *
Unit: mm (in)
Used belt
New belt
Limit
After adjusted
Drive belt
With A/C models
7.9 (0.31)
4.8 - 5.3 (0.19 - 0.21)
4.2 - 4.5 (0.17 - 0.18)
Without A/C models
7.1 (0.28)
4.3 - 4.7 (0.17 - 0.19)
3.6 - 3.9 (0.14 - 0.15)
Applied pushing force
98 N (10 kg, 22 lb)
Location
Tension adjustment *
Unit: N (kg, lb)
Frequency adjustment *
Unit: Hz
Used belt
New belt
Used belt
New belt
Limit
After adjusted
Limit
After adjusted
Drive belt
With A/C models
500 (51.0, 112)
876 - 964
(89.4 - 98.3,
197 - 217)
1064 - 1152
(108.5 - 117.5,
239 - 259)
163
216 - 225
238 - 246
Without A/C models
500 (51.0, 112)
876 - 964
(89.4 - 98.3,
197 - 217)
1064 - 1152
(108.5 - 117.5,
239 - 259)
183
242 - 252
266 - 276
Tension of drive belt
Auto adjustment by auto-tensioner
Tension of drive belt
Auto adjustment by auto-tensioner
Engine coolant capacity [With reservoir tank (“MAX” level)]
5.9 (5-1/4)
Reservoir tank engine coolant capacity (At “MAX” level)
0.78 (5/8)
SERVICE DATA AND SPECIFICATIONS (SDS)
MA-69
< SERVICE DATA AND SPECIFICATIONS (SDS)
C
D
E
F
G
H
I
J
K
L
M
B
MA
N
O
A
ENGINE COOLANT (MR20DE)
ENGINE COOLANT (MR20DE) : Periodical Maintenance Specification
INFOID:0000000001095811
ENGINE COOLANT CAPACITY (APPROXIMATE)
Unit:
(Imp qt)
ENGINE COOLANT (K9K)
ENGINE COOLANT (K9K) : Periodical Maintenance Specification
INFOID:0000000001095812
ENGINE COOLANT CAPACITY (APPROXIMATE)
Unit:
(Imp qt)
ENGINE OIL (HR16DE)
ENGINE OIL (HR16DE) : Periodical Maintenance Specification
INFOID:0000000001095861
ENGINE OIL CAPACITY (APPROXIMATE)
Unit:
(lmp qt)
ENGINE OIL (MR20DE)
ENGINE OIL (MR20DE) : Periodical Maintenance Specification
INFOID:0000000001095862
ENGINE OIL CAPACITY (APPROXIMATE)
Unit:
(lmp qt)
ENGINE OIL (K9K)
ENGINE OIL (K9K) : Periodical Maintenance Specification
INFOID:0000000001095863
ENGINE OIL CAPACITY (APPROXIMATE)
Unit: ·(Imp
qt)
SPARK PLUG (HR16DE)
SPARK PLUG (HR16DE) : Spark Plug
INFOID:0000000001095806
SPARK PLUG (PLATINUM-TIPPED TYPE)
Engine coolant capacity (With reservoir tank at “MAX” level)
M/T models
7.6 (6-5/8)
CVT models
8.9 (7-7/8)
Reservoir tank engine coolant capacity (At “MAX” level)
0.78 (5/8)
Engine coolant capacity [With reservoir tank (“MAX” level)]
7.0 (6-1/8)
Reservoir tank engine coolant capacity (At “MAX” level)
0.8 (3/4)
Drain and refill
With oil filter change
4.3 (3-3/4)
Without oil filter change
4.1 (3-5/8)
Dry engine (Overhaul)
4.8 (4-1/4)
Drain and refill
With oil filter change
4.4 (3-7/8)
Without oil filter change
4.2 (3-3/4)
Dry engine (Overhaul)
5.2 (4-5/8)
With oil filter change
4.55 (4)
Without oil filter change
4.39 (3-7/8)
Dry engine (overhaul)
4.71 (4-1/8)
MA-70
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Unit: mm (in)
SPARK PLUG (MR20DE)
SPARK PLUG (MR20DE) : Spark Plug
INFOID:0000000001095808
SPARK PLUG
Unit: mm (in)
ROAD WHEEL
ROAD WHEEL : Road Wheel
INFOID:0000000001095913
Make
NGK
Standard type
PLZKAR6A-11
Gap (Nominal)
1.1 (0.043)
Make
NGK
Standard type
PLZKAR6A-11
Gap (Nominal)
1.1 (0.043)
Kind of wheel
Aluminum
Steel
Conventional
For temporary use
Maximum radial runout limit
Lateral deflection
Less than 0.3 mm
(0.012 in)
Less than 0.8 mm
(0.031 in)
Less than 1.2 mm
(0.047 in)
Vertical deflection
Less than 0.7 mm
(0.028 in)
Less than 1.3 mm
(0.051 in)
Maximum allowable unbalance limit
Dynamic (At flange)
Less than 10 g (0.35 oz) (one side)
Static (At flange)
Less than 20 g (0.71 oz)
Wheel nuts tightening torque
112.6 N·m (11 kg–m, 83 ft–lb)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст