Nissan Qashqai (2007-2010). Manual — part 1456
REAR WASHER NOZZLE AND TUBE
WW-115
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
3.
Push pawl (A), and remove the rear washer nozzle (1) from the
high-mounted stop lamp.
INSTALLATION
Install in the reverse order of removal.
Inspection
INFOID:0000000000936394
INSPECTION
Washer Nozzle Inspection
Check that air can pass through the hose by blowing forward (toward
the nozzle), and check that air cannot pass through by sucking.
Washer Nozzle Spray Position
Check spray positions to match the positions shown in the figure.
Unit: mm (in)
NOTE:
If wax or dust gets into the nozzle, remove wax or dust with a needle
or small pin.
JPLIA0284ZZ
: To rear washer nozzle
JPLIA0285ZZ
1
: Black printed frame line
Spray position
h (Height)
I (width)
φ
(Spray position
area)
A
43 (1.69)
93.6 (3.69)
30 (1.18)
JPLIA0286ZZ
DEF-1
DRIVER CONTROLS
C
D
E
F
G
H
I
J
K
M
SECTION
DEF
A
B
DEF
N
O
P
CONTENTS
DEFOGGER
BASIC INSPECTION . . . . . . . . .
DIAGNOSIS AND REPAIR WORKFLOW . . ..
Work Flow . . . . . . . . . . . . . . . .....
FUNCTION DIAGNOSIS . . . . . . . ...
REAR WINDOW DEFOGGER SYSTEM . . . .
System Diagram . . . . . . . . . . . . . ....
System Description . . . . . . . . . . . . ...
Component Parts Location . . . . . . . . . ....
Component Description . . . . . . . . . . .....
DIAGNOSIS SYSTEM (BCM) . . . . . . . .
COMMON ITEM . . . . . . . . . . . . . . ...
COMMON ITEM : CONSULT-III Function (BCM -
COMMON ITEM) . . . . . . . . . . . . . ...
REAR WINDOW DEFOGGER . . . . . . . . .....
REAR WINDOW DEFOGGER : CONSULT-III
Function (BCM - REAR DEFOGGER) . . . . . ..
DIAGNOSIS SYSTEM (IPDM E/R) . . . . . ..
Diagnosis Description . . . . . . . . . . . ...
CONSULT - III Function (IPDM E/R) . . . . . ...
COMPONENT DIAGNOSIS . . . . . . .
REAR WINDOW DEFOGGER SWITCH . . .
WITH AUTO A/C . . . . . . . . . . . . . .
WITH AUTO A/C : Description . . . . . . . .
WITH AUTO A/C : Component Function Check . .
WITH AUTO A/C : Diagnosis Procedure . . . . .
WITHOUT AUTO A/C . . . . . . . . . . . .
WITHOUT AUTO A/C : Description . . . . . .
WITHOUT AUTO A/C : Component Function
Check . . . . . . . . . . . . . . . . . ..
WITHOUT AUTO A/C : Diagnosis Procedure . . .
WITHOUT AUTO A/C : Component Inspection . ..
REAR WINDOW DEFOGGER POWER SUP-
PLY AND GROUND CIRCUIT . . . . . . ..
Description . . . . . . . . . . . . . . . ...
Component Function Check . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
Component Inspection . . . . . . . . . . . .
DRIVER SIDE DOOR MIRROR DEFOGGER ...
Description . . . . . . . . . . . . . . . ...
Component Function Check . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
Component Inspection . . . . . . . . . . . .
PASSENGER SIDE DOOR MIRROR DEFOG-
GER . . . . . . . . . . . . . . . . ...
Description . . . . . . . . . . . . . . . ...
Component Function Check . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
Component Inspection . . . . . . . . . . . .
REAR WINDOW DEFOGGER ON SIGNAL . .
WITH AUTO A/C . . . . . . . . . . . . . .
WITH AUTO A/C : Description . . . . . . . .
WITH AUTO A/C : Component Function Check . ..
WITH AUTO A/C : Diagnosis Procedure . . . . .
WITHOUT AUTO A/C . . . . . . . . . . . .
WITHOUT AUTO A/C : Description . . . . . . .
WITHOUT AUTO A/C : Component Function
Check . . . . . . . . . . . . . . . . . ..
WITHOUT AUTO A/C : Diagnosis Procedure . . .
ECU DIAGNOSIS . . . . . . . . . . .
BCM (BODY CONTROL MODULE) . . . . .
Reference Value . . . . . . . . . . . . . ..
Wiring Diagram - DEFOGGER CONTROL SYS-
TEM (LHD MODELS) - . . . . . . . . . . .
Wiring Diagram - DEFOGGER CONTROL SYS-
TEM (RHD MODELS) - . . . . . . . . . . ...
DEF-2
DTC Inspection Priority Chart . . . . . . . ..
DTC Index . . . . . . . . . . . . . . . ..
IPDM E/R (INTELLIGENT POWER DISTRI-
BUTION MODULE ENGINE ROOM) . . . . .
Reference Value . . . . . . . . . . . . . .
Wiring Diagram - DEFOGGER CONTROL SYS-
TEM (LHD MODELS) - . . . . . . . . . . ...
Wiring Diagram - DEFOGGER CONTROL SYS-
TEM (RHD MODELS) - . . . . . . . . . . ..
Fail Safe . . . . . . . . . . . . . . . . .
DTC Index . . . . . . . . . . . . . . . ..
SYMPTOM DIAGNOSIS . . . . . . . .
REAR WINDOW DEFOGGER DOES NOT
OPERATE . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ..
REAR WINDOW DEFOGGER AND DOOR
MIRROR DEFOGGER DO NOT OPERATE. . .
Diagnosis Procedure . . . . . . . . . . . ..
REAR WINDOW DEFOGGER DOES NOT
OPERATE BUT BOTH OF DOOR MIRROR
DEFOGGER OPERATE. . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
DRIVER SIDE DOOR MIRROR DEFOGGER
DOES NOT OPERATE. . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
PASSENGER SIDE DOOR MIRROR DEFOG-
GER DOES NOT OPERATE. . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
PRECAUTION . . . . . . . . . . .
PRECAUTIONS . . . . . . . . . . . . .
ON-VEHICLE MAINTENANCE . . . . ..
PRE-INSPECTION FOR DIAGNOSTIC . . .
Basic Inspection . . . . . . . . . . . . . ..
ON-VEHICLE REPAIR . . . . . . . ...
FILAMENT . . . . . . . . . . . . . . .
DIAGNOSIS AND REPAIR WORKFLOW
DEF-3
< BASIC INSPECTION >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000000951256
DETAILED FLOW
1.
OBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain the malfunction information (conditions and environment when the malfunc-
tion occurred) as much as possible when the customer brings the vehicle in.
>> GO TO 2.
2.
CHECK DTC
Perform self diagnosis with CONSULT-III
Is any DTC detected?
YES
>> Refer to
NO
>> GO TO 3.
3.
REPRODUCE THE MALFUNCTION INFORMATION
Check the malfunction on the vehicle that the customer describes.
Inspect the relation of the symptoms and the condition when the symptoms occur.
>> GO TO 4.
4.
PERFORM “BASIC INSPECTION”
Perform the basic inspection.Refer to
.
>> GO TO 5.
5.
IDENTIFY THE MALFUNCTIONING SYSTEM WITH “SYMPTOM DIAGNOSIS”
Use “Symptom diagnosis” from the symptom inspection result in step 3. Then identify where to start perform-
ing the diagnosis based on possible causes and symptoms.
>> GO TO 6.
6.
IDENTIFY MALFUNCTIONING PARTS WITH “COMPONENT DIAGNOSIS”
Perform the diagnosis with “Component diagnosis” of the applicable system.
>> GO TO 7.
7.
REPAIR OR REPLACE THE MALFUNCTIONING PARTS
Repair or replace the specified malfunctioning parts.
>> GO TO 8.
8.
FINAL CHECK
Check that malfunctions are not reproduced when obtaining the malfunction information from the customer,
referring to the symptom inspection result in step 3.
Is the malfunctioning part repaired or replaced?
YES
>> Trouble diagnosis is completed.
NO
>> GO TO 4.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст