Nissan Qashqai (2007-2010). Manual — part 1454
![](/vehicle/qul/ene/lirlel/sashoreaveto.png)
FRONT WIPER DRIVE ASSEMBLY
WW-107
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
3.
Remove bolts from the front wiper drive assembly.
4.
Disconnect the front wiper motor connector.
5.
Remove front wiper drive assembly from the vehicle.
INSTALLATION
1.
Install the front wiper drive assembly to the vehicle.
2.
Connect the front wiper motor connector.
3.
Operate the front wiper to move it to the auto stop position.
4.
Install the cowl top cover. Refer to
5.
Install front wiper arms. Refer to
LHD MODELS : Disassembly and Assembly
INFOID:0000000000924471
DISASSEMBLY
1.
Remove the front wiper linkage 1 and 2 from the front wiper drive assembly.
CAUTION:
Do not bend the linkage or damage the plastic part of the ball joint when removing the front wiper
linkage.
2.
Remove the front wiper motor mounting screws, and then remove the front wiper motor from the front
wiper frame.
ASSEMBLY
1.
Connect the front wiper motor connector.
2.
Operate the front wiper to move it to the auto stop position.
3.
Disconnect the front wiper motor connector.
4.
Install front wiper motor to front wiper frame.
5.
Install the front wiper linkage 2 to the front wiper motor and the front wiper frame.
6.
Install the front wiper linkage 1 to the front wiper frame.
CAUTION:
• Do not drop front wiper motor or cause it to come into contact with other parts.
• Be careful for the grease condition at the front wiper motor and front wiper linkage joint
(retainer). Apply multi
−
purpose grease or an equivalent if necessary.
RHD MODELS
RHD MODELS : Exploded View
INFOID:0000000000949930
REMOVAL VIEW
JPLIA0296ZZ
![](/vehicle/qul/ene/lirlel/kiewas.png)
WW-108
< ON-VEHICLE REPAIR >
FRONT WIPER DRIVE ASSEMBLY
DISASSEMBLY VIEW
RHD MODELS : Removal and Installation
INFOID:0000000000949931
REMOVAL
1.
Remove front wiper arm. Refer to
2.
Remove cowl top cover. Refer to
.
3.
Remove bolts from the front wiper drive assembly.
4.
Disconnect the front wiper motor connector.
5.
Remove front wiper drive assembly from the vehicle.
INSTALLATION
1.
Install the front wiper drive assembly to the vehicle.
2.
Connect the front wiper motor connector.
3.
Operate the front wiper to move it to the auto stop position.
4.
Install the cowl top cover. Refer to
5.
Install front wiper arms. Refer to
RHD MODELS : Disassembly and Assembly
INFOID:0000000000949932
DISASSEMBLY
1.
Remove the front wiper linkage 1 and 2 from the front wiper drive assembly.
CAUTION:
Do not bend the linkage or damage the plastic part of the ball joint when removing the front wiper
linkage.
2.
Remove the front wiper motor mounting screws, and then remove the front wiper motor from the front
wiper frame.
ASSEMBLY
1.
Connect the front wiper motor connector.
2.
Operate the front wiper to move it to the auto stop position.
1.
Front wiper drive assembly
1.
Front wiper linkage 1
2.
Shaft seal
3.
Front wiper linkage 2
4.
Front wiper frame
5.
Front wiper motor
: Multi
−
purpose grease or an equivalent.
JPLIA0298GB
FRONT WIPER DRIVE ASSEMBLY
WW-109
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
3.
Disconnect the front wiper motor connector.
4.
Install front wiper motor to front wiper frame.
5.
Install the front wiper linkage 2 to the front wiper motor and the front wiper frame.
6.
Install the front wiper linkage 1 to the front wiper frame.
CAUTION:
• Do not drop front wiper motor or cause it to come into contact with other parts.
• Be careful for the grease condition at the wiper motor and wiper linkage joint (retainer). Apply
multi
−
purpose grease or an equivalent if necessary.
WW-110
< ON-VEHICLE REPAIR >
RAIN SENSOR
RAIN SENSOR
Exploded View
INFOID:0000000000906861
.
Removal and Installation
INFOID:0000000000906863
EXL-175, "Removal and Installation"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст