Nissan Qashqai (2007-2010). Manual — part 1131
DOOR LOCK ACTUATOR
DLK-603
< COMPONENT DIAGNOSIS >
[WITHOUT I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> Replace door lock actuator. Refer to
DLK-700, "DOOR LOCK : Exploded View"
"DOOR LOCK : Removal and Installation"
.
REAR LH : Component Inspection
INFOID:0000000001099040
1.
CHECK REAR DOOR LOCK ACTUATOR (LH)
Check the actuator operation by connecting the battery voltage directly to rear door lock actuator (LH).
Is the inspection result normal?
YES
>> Rear door lock actuator (LH) is OK.
NO
>> Replace rear door lock actuator (LH). Refer to
DLK-262, "DOOR LOCK : Removal and Installa-
.
REAR RH
REAR RH : Description
INFOID:0000000001099041
Locks/unlocks the door with the signal from BCM.
REAR RH : Component Function Check
INFOID:0000000001099042
1.
CHECK FUNCTION
With CONSULT-III
Check “DOOR LOCK” in Active test mode with CONSULT-III.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-603, "REAR RH : Diagnosis Procedure"
REAR RH : Diagnosis Procedure
INFOID:0000000001099043
1.
CHECK OUTPUT SIGNAL
Check voltage between BCM connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
CHECK DOOR LOCK ACTUATOR CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect BCM and rear door lock actuator (RH) connector.
Rear door lock actuator (LH)
Terminal
Door lock actuator condition
(+)
(-)
D85
3
2
LOCK
2
3
UNLOCK
Test item
Condition
DOOR LOCK
:ALL LOCK
The all door lock actuator are locked
:ALL UNLOCK
The all door lock actuator are unlocked
:OTHER UNLOCK
The door lock actuator (front passenger side, rear LH and rear RH) are unlocked
Terminals
Condition of door lock
and unlock switch
Voltage (V)
(Approx.)
(+)
(–)
BCM connector
Terminal
M67
56
Ground
Lock
0
→
Battery voltage
→
0
54
Unlock
0
→
Battery voltage
→
0
DLK-604
< COMPONENT DIAGNOSIS >
[WITHOUT I-KEY & SUPER LOCK]
DOOR LOCK ACTUATOR
3.
Check continuity between BCM connector and rear door lock actuator (RH) connector.
4.
Check continuity between BCM connector and ground.
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> Repair or replace harness.
3.
CHECK DOOR LOCK ACTUATOR
Check door lock actuator.
Refer to
DLK-604, "REAR RH : Component Inspection"
.
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> Replace door lock actuator. Refer to
DLK-255, "DOOR LOCK : Removal and Installation"
REAR RH : Component Inspection
INFOID:0000000001099044
1.
CHECK REAR DOOR LOCK ACTUATOR (RH)
Check the actuator operation by connecting the battery voltage directly to rear door lock actuator (RH).
Is the inspection result normal?
YES
>> Rear door lock actuator (RH) is OK.
NO
>> Replace rear door lock actuator (RH). Refer to
DLK-255, "DOOR LOCK : Removal and Installa-
.
BCM connector
Terminal
Door lock actuator
connector
Terminal
Continuity
M67
56
D105
3
Exists
54
2
BCM connector
Terminal
Ground
Continuity
M67
56
Does not exist
54
Rear door lock actuator (RH)
Terminal
Door lock actuator condition
(+)
(-)
D105
3
2
LOCK
2
3
UNLOCK
BACK DOOR OPENER ACTUATOR
DLK-605
< COMPONENT DIAGNOSIS >
[WITHOUT I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
BACK DOOR OPENER ACTUATOR
Description
INFOID:0000000001116447
Opens the back door with the signal from BCM.
Component Function Check
INFOID:0000000001116448
1.
CHECK FUNCTION
With CONSULT-III
Check “TRUNK/GLASS HATCH” in Active test mode with CONSULT-III.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-605, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000001116449
1.
CHECK BCM OUTPUT SIGNAL
Check voltage between BCM connector and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> GO TO 2.
2.
CHECK BACK DOOR LOCK ASSEMBLY CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect BCM and back door lock assembly connector.
3.
Check continuity between BCM connector and back door lock assembly connector.
4.
Check continuity between BCM connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK BACK DOOR LOCK ASSEMBLY GROUND CIRCUIT
Check continuity between back door lock assembly connector and ground.
Is the inspection result normal?
Test item
Condition
TRUNK/GLASS HATCH
:OPEN
Back door lock opener actuator operation
Terminals
Condition of back door
opener switch
Voltage (V)
(Approx.)
(+)
(–)
BCM connector
Terminal
M66
45
Ground
Pressed
0
→
Battery voltage
→
0
BCM connector
Terminal
Back door lock assembly
connector
Terminal
Continuity
M66
45
D152
2
Exists
BCM connector
Terminal
Ground
Continuity
M66
45
Does not exist
Back door lock assembly
connector
Terminal
Ground
Continuity
D152
1
Exists
DLK-606
< COMPONENT DIAGNOSIS >
[WITHOUT I-KEY & SUPER LOCK]
BACK DOOR OPENER ACTUATOR
YES
>> GO TO 4.
NO
>> Repair or replace harness.
4.
CHECK BACK DOOR LOCK ASSEMBLY
Check back door lock assembly connector and ground.
Refer to
DLK-606, "Component Inspection"
.
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> Replace back door lock assembly. Refer to
DLK-268, "DOOR LOCK : Exploded View"
268, "DOOR LOCK : Removal and Installation"
.
Component Inspection
INFOID:0000000001116450
1.
CHECK BACK DOOR LOCK ASSEMBLY
Check the actuator operation by connecting battery voltage to back door lock assembly.
Is the inspection result normal?
YES
>> Back door lock assembly (back door lock actuator) is OK.
NO
>> Replace back door lock assembly (back door lock actuator). Refer to
DLK-268, "DOOR LOCK : Removal and Installation"
.
Back door lock assembly
connector
Terminal
Back door actuator condition
D152
(+)
(-)
OPEN
2
1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст