Chrysler Pacifica (2019 year). Instruction — part 39
Setting Name
Selectable Options
1. Press the “Subscription Info” button on the touchscreen to access the Subscription Information screen.
2. Write down the Sirius ID numbers for your receiver. To reactivate your service, either call the number listed on the
screen or visit the provider online.
SiriusXM Travel Link is a separate subscription.
Language
After pressing the “Language” button on the touchscreen,
the following settings will be available:
Setting Name
Selectable Options
Language
List of Languages
NOTE:
When the “Set Language” feature is selected, you may select one of multiple languages (English / Français / Espa-
ñol) for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the “Set
Language” button on the touchscreen, then press the desired language button on the touchscreen until a check-mark
appears next to the language, showing that setting has been selected.
10
MULTIMEDIA
617
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Display
After pressing the “Display” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Display Mode
Instruction
Auto
Display Brightness With
Headlights ON
+
-
NOTE:
To make changes to the
⬙Display Brightness with Headlights ON⬙ setting, the headlights must be on and the interior
dimmer switch must not be in the
⬙party⬙ or ⬙parade⬙ positions.
Display Brightness With
Headlights OFF
+
-
NOTE:
To make changes to the
⬙Display Brightness with Headlights OFF⬙ setting, the headlights must be off and the interior
dimmer switch must not be in the
⬙party⬙ or ⬙parade⬙ positions.
Set Theme
On
Off
NOTE:
When the “Set Theme” feature is selected, you may select the theme for the display screen. To make your selection,
press the
⬙Set Theme⬙ button on the touchscreen, then select the desired theme option button until a check-mark ap-
pears showing that the setting has been selected.
618
MULTIMEDIA
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Setting Name
Selectable Options
Touchscreen Beep
On
Off
Control Screen Time-Out —
If Equipped
On
Off
NOTE:
When the “Control Screen Time-Out” feature is selected, the Controls Screen will stay open for five seconds before
the screen times out. With the feature deselected, the screen will stay open until it is instructionly closed.
Navigation Turn-By-Turn In
Cluster — If Equipped
On
Off
NOTE:
When the “Navigation Turn-By-Turn In Cluster” feature is selected, the turn-by-turn directions will appear in the in-
strument cluster display as the vehicle approaches a designated turn within a programmed route.
Phone Pop-ups Displayed in
Cluster
On
Off
10
MULTIMEDIA
619
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Units
After pressing the “Units” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Units
US
Metric
Custom
NOTE:
The “Custom” option allows you to set the “Speed” (MPH, or km/h), “Distance” (mi, or km), “Fuel Consumption”
[MPG (US), MPG (UK), L/100 km, or km/L], “Pressure” (psi, kPa, or bar), and “Temperature” (°C, or °F) units of
measure independently.
Voice
After pressing the “Voice” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Voice Response Length
Brief
Detailed
Show Command List
Never
With Help
Always
620
MULTIMEDIA
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Camera
After pressing the “Camera” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Surround View Camera — If
Equipped
On
Off
NOTE:
The “Surround View Camera” feature displays a complete 360 degree view of the vehicle’s exterior environment
while backing up.
Surround View Camera Delay — If
Equipped
On
Off
NOTE:
The “Surround View Camera Delay” setting determines whether or not the screen will display the 360 degree view
image with guidelines for up to ten seconds after the vehicle is shifted out of REVERSE. This delay will be canceled if
the vehicle’s speed exceeds 8 mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to the
OFF position.
10
MULTIMEDIA
621
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Setting Name
Selectable Options
Surround View Camera Guidelines
— If Equipped
On
Off
NOTE:
The “Surround View Rear Back Up Camera Active Guidelines” feature allows you to see active guidelines over the
Surround View camera display whenever the gear selector is put into REVERSE or the Surround View button on the
touchscreen is pressed. The image will be displayed on the radio touchscreen display.
ParkView Backup Camera Delay
On
Off
NOTE:
The “ParkView Backup Camera Delay” setting determines whether or not the screen will display the rear view image
with dynamic grid lines for up to ten seconds after the vehicle is shifted out of REVERSE. This delay will be canceled
if the vehicle’s speed exceeds 8 mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to
the OFF position.
ParkView Backup Camera Active
Guide Lines
On
Off
NOTE:
The “ParkView Backup Camera Active Guide Lines” feature overlays the Rear Backup Camera image with active, or
dynamic, grid lines to help illustrate the width of the vehicle and its project back up path, based on the steering
wheel position when the option is checked. A dashed center line overlay indicates the center of the vehicle to assist
with parking or aligning to a hitch/receiver.
622
MULTIMEDIA
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Clock
After pressing the “Clock” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Sync Time With GPS — If Equipped
On
Off
Set Time Hours
+
-
NOTE:
The “Set Time Hours” feature will allow you to adjust the hours. The “Sync Time With GPS” button on the touch-
screen must be unchecked.
Set Time Minutes
+
-
NOTE:
The “Set Time Minutes” feature will allow you to adjust the minutes. The “Sync Time with GPS” button on the touch-
screen must be unchecked.
Time Format
12hrs
24hrs
AM
PM
10
MULTIMEDIA
623
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Safety & Driving Assistance
After pressing the “Safety & Driving Assistance” button on
the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Automatic Emergency
Braking — If Equipped
List Of Settings
When “Automatic Emergency Braking” is selected, the following options will appear:
• Forward Collision Warning — If Equipped: Select “Only Warning” or “Warning + Active Braking”
NOTE:
Changing the FCW status to “Off” prevents the system from warning you of a possible collision with the vehicle in
front of you.
The FCW system state is kept in memory from one ignition cycle to the next. If the system is turned OFF, it will re-
main off when the vehicle is restarted.
Forward Collision Warning includes Advanced Brake Assist (ABA). The ABA applies additional brake pressure when
the driver requests insufficient brake pressure to avoid a potential frontal collision. When the “Sound Only” option is
selected a chime will sound alerting you of a possible collision with the vehicle in front of you and more brake pres-
sure is needed. When the “Sound and Brake” option is selected, it will apply the brakes to slow your vehicle in case
of potential forward collision and sound an audible chime to alert you.
624
MULTIMEDIA
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Setting Name
Selectable Options
• Forward Collision Warning Sensitivity — If Equipped: Select “Near,” “Med” or “Far”
NOTE:
The “Forward Collision Warning Sensitivity” setting determines at what relative distance the vehicle directly in front
of you needs to be at, before the system will warn you of a possible collision with the vehicle directly in front of you,
based on the option selected. “Far” will give you the most amount of reaction time, whereas “Near” will give you the
least amount of reaction time, based on the distance between the two vehicles.
ParkSense — If Equipped
Sound Only
Sound and Display
NOTE:
The “ParkSense” system setting will scan for objects behind the vehicle when the transmission gear selector is in RE-
VERSE and the vehicle speed is less than 7 mph (11 km/h), when enabled. It will provide an alert (audible and/or
visual) to indicate the proximity to other objects. The system can be enabled with “Sound Only,” or “Sound and Dis-
play.”
Front ParkSense Volume
Low
Medium
High
Rear ParkSense Volume
Low
Medium
High
Sliding Door Alert — If
Equipped
On
Off
NOTE:
When the “Sliding Door Alert” feature is selected, a chime plays when the sliding door reverses or an obstacle is
sensed.
10
MULTIMEDIA
625
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Setting Name
Selectable Options
LaneSense Warning — If
Equipped
Early
Medium
Late
NOTE:
The “LaneSense Warning” setting determines at what distance the LaneSense system will warn you, through steering
wheel feedback, of a possible lane departure.
LaneSense Strength — If
Equipped
Low
Medium
High
Blind Spot Alert — If
Equipped
Off
Lights
Lights and Chime
NOTE:
When the “Blind Spot Alert” feature is selected, the Blind Spot Monitor (BSM) system is activated and will show a
visual alert in the outside mirrors, or it will show a visual alert in the outside mirrors as well as play an audible alert
when the turn signal is on. When “Off” is selected, the Blind Spot Monitor (BSM) system is deactivated.
If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not damaged,
the sensor may have become misaligned. Take your vehicle to an authorized dealer to verify sensor alignment. A sen-
sor that is misaligned will result in the BSM not operating to specification.
Hill Start Assist — If
Equipped
On
Off
626
MULTIMEDIA
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Mirrors & Wipers
After pressing the “Mirror and Wipers” button on the
touchscreen, the following settings will be available:
Setting Name
Selectable Options
Rain Sensing Auto Wipers
On
Off
Tilt Side Mirrors in Reverse
On
Off
Headlights with Wipers
On
Off
Brakes
After pressing the “Brakes” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Auto Park Brake
On
Off
Brake Service
Yes
No
NOTE:
Selecting the “Brake Service” feature will display a pop-up asking whether or you would like to retract the park
brakes to all break system service.
10
MULTIMEDIA
627
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Lights
After pressing the “Lights” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Headlight Off Delay
0 sec
30 sec
60 sec
90 sec
NOTE:
When the “Headlight Off Delay” feature is selected, it allows the adjustment of the amount of time the headlights
remain on after the vehicle is shut off.
Headlight Illumination On
Approach
0 sec
30 sec
60 sec
90 sec
NOTE:
When the “Headlight Illumination On Approach” feature is selected, it allows the adjustment of the amount of time
the headlights remain on after the doors are unlocked with the key fob.
Headlights With Wipers — If
Equipped
On
Off
Auto Dim High Beams— If
Equipped
On
Off
628
MULTIMEDIA
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Setting Name
Selectable Options
NOTE:
When the “Auto Dim High Beams” feature is selected, the high beam headlights will activate/deactivate automati-
cally under certain conditions.
Daytime Running Lights
On
Off
Flash Lights With Lock
On
Off
Flash Lights With Sliding Door
On
Off
Doors & Locks
After pressing the “Doors & Locks” button on the touch-
screen, the following settings will be available:
NOTE:
The auto door lock feature default condition is
enabled. When enabled, the door locks will lock automati-
cally when the vehicle’s speed exceeds 12 mph (20 km/h).
The auto door lock feature can be enabled or disabled by an
authorized dealer per written request of the customer.
Please see an authorized dealer for service.
Setting Name
Selectable Options
Auto Unlock On Exit
On
Off
NOTE:
When the “Auto Unlock On Exit” feature is selected, all doors will unlock when the vehicle is stopped and the trans-
mission is in the PARK or NEUTRAL position and the driver’s door is opened.
10
MULTIMEDIA
629
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Setting Name
Selectable Options
Flash Lights With Lock
On
Off
Sound Horn With Lock — If
Equipped
Off
1st Press
2nd Press
Sound Horn With Remote Start
— If Equipped
On
Off
1st Press Of Key Fob Unlocks
Driver Door
All Doors
NOTE:
When the “1st Press Of Key Fob Unlocks” feature’s “Driver” option is selected, only the driver’s door will unlock on
the first push of the key fob unlock button; you must push the key fob unlock button twice to unlock the passenger’s
doors. When “All” is selected, all of the doors will unlock on the first press of the key fob unlock button. If “All” is
programmed, all doors will unlock no matter which Passive Entry equipped door handle is grasped. If “Driver” is
programmed, only the driver’s door will unlock when the driver’s door is grasped. Touching the handle more than
once will only result in the driver’s door opening once. If the driver door is opened, the interior door lock/unlock
switch can be used to unlock all doors (or use key fob).
Passive Entry
On
Off
Power Liftgate Alert
On
Off
NOTE:
When the “Power Liftgate Alert” feature is selected, an alert plays when the power liftgate is raising or lowering.
630
MULTIMEDIA
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Setting Name
Selectable Options
Sliding Door Alert
On
Off
NOTE:
When the “Sliding Door Alert” feature is selected, a chime plays when the sliding door reverses or an obstacle is
sensed.
Flash Lights with Sliding Door
On
Off
Hands Free Power Lift Gate
On
Off
Hands Free Sliding Door
On
Off
Personal Settings Linked to Key
Fob — If Equipped
On
Off
NOTE:
The “Personal Settings Linked to Key Fob” feature provides automatic recall of all settings stored to a memory loca-
tion (driver’s seat, exterior mirrors, steering column position and radio station pre-sets) to enhance driver mobility
when entering and exiting the vehicle.
The seat returns to the memorized seat location, if the settings is set to “On,” when the key fob is used to unlock the
door.
10
MULTIMEDIA
631
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Auto-On Comfort — If Equipped
After pressing the “Auto-On Comfort” button on the
touchscreen, the following settings will be available:
Setting Name
Selectable Options
Auto-On Driver Heated/
Ventilated Seat & Steering
Wheel With Vehicle Start
— If Equipped
Off
Remote Start
All Starts
NOTE:
When this feature is selected, the driver’s heated seat and heated steering wheel will automatically turn on when tem-
peratures are below 40° F (4.4° C). When temperatures are above 80° F (26.7° C) the driver vented seat will turn on.
Engine Off Options
After pressing the “Engine Off Options” button on the
touchscreen, the following settings will be available:
Setting Name
Selectable Options
Engine Off Power Delay — If
Equipped
0 sec
45 sec
5 min
10 min
632
MULTIMEDIA
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст