Subaru Impreza 3 / Impreza WRX / Impreza WRX STI. Service manual — part 735
EI-27
Front Hood Grille
EXTERIOR/INTERIOR TRIM
3. Front Hood Grille
A: REMOVAL
1) Open the front hood.
2) Remove the front hood insulator. <Ref. to EB-
15, FRONT HOOD INSULATOR, REMOVAL,
3) Remove screws (A) and clips (B), and remove
the hood duct assembly.
• Except for STI model
• STI model
4) Remove the nuts (A) and clips (B), and remove
the front hood grille.
B: INSTALLATION
Install each part in the reverse order of removal.
NOTE:
Insert the hooks (B) of the front hood duct into holes
(A) of the front hood.
Tightening torque:
Refer to “COMPONENT” of “General Descrip-
tion”. <Ref. to EI-4, FRONT HOOD GRILLE,
COMPONENT, General Description.>
(A)
(A)
(A)
(A)
(A)
(A)
(B)
(B)
(B)
(B)
(B)
(B) (B)
(B) (B)
(B)
(B)
(B)
(B)
EI-01954
EI-01966
:(A)
:(B)
EI-01782
(A)
(A)
(A)
(A)
(A)
(A)
(B)
(B)
EI-00634
(B)
(A)
EI-28
Front Under Cover
EXTERIOR/INTERIOR TRIM
4. Front Under Cover
A: REMOVAL
1) Lift up the vehicle
2) Remove clips (A), (C) in front fender and bolts
(B), then remove the front under cover.
B: INSTALLATION
Install each part in the reverse order of removal.
Tightening torque:
18 N·m (1.84 kgf-m, 13.3 ft-lb)
EI-00735
(B)
(C)
(A)
(A)
EI-29
Fuel Tank Protector
EXTERIOR/INTERIOR TRIM
5. Fuel Tank Protector
A: REMOVAL
1) Lift up the vehicle.
2) Remove the bolts (A) and nuts (B), and then re-
move the fuel tank protector.
B: INSTALLATION
CAUTION:
Do not reuse the nut (self locking nut). Always
replace with a new part.
Install each part in the reverse order of removal.
Tightening torque:
Refer to “COMPONENT” of “General Descrip-
tion”. <Ref. to EI-3, UNDER PROTECTOR,
COMPONENT, General Description.>
EI-00638
(B)
(B)
(A)
(A)
(B)
(B)
(A)
(A)
(A)
(A)
EI-30
Mud Guard
EXTERIOR/INTERIOR TRIM
6. Mud Guard
A: REMOVAL
1. FRONT MUD GUARD
1) Lift up the vehicle.
2) Remove the front wheels.
3) Remove the screws and clips to remove the mud
guard.
2. REAR MUD GUARD
1) Lift up the vehicle.
2) Remove the rear wheels.
3) Remove the screws and clips to remove the mud
guard.
B: INSTALLATION
Install each part in the reverse order of removal.
(1) Rear mud guard RH
(2) Rear mud guard LH
EI-04200
EI-04201
(1)
(2)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст