Subaru Impreza 3 / Impreza WRX / Impreza WRX STI. Service manual — part 734
EI-23
General Description
EXTERIOR/INTERIOR TRIM
20.REAR GATE TRIM
21.ROOF TRIM
(1)
Rear gate pillar trim
(2)
Rear gate upper trim
(3)
Rear gate lower trim
(1)
Model without sunroof (5 door
model)
(3)
Model without sunroof (4 door
model)
(4)
Model with sunroof (4 door model)
(2)
Model with sunroof (5 door model)
(1)
(2)
(1)
(3)
EI-01765
EI-02933
(1)
(2)
(3)
(4)
EI-24
General Description
EXTERIOR/INTERIOR TRIM
22.ROOM INNER PARTS
23.HEAT SHIELD COVER
(1)
Room mirror
(3)
Assist grip
Tightening torque: N·m (kgf-m, ft-lb)
(2)
Sun visor
T: 7.5 (0.76, 5.5)
(1)
Front heat shield cover
(3)
Rear heat shield cover (5 door
model)
Tightening torque: N·m (kgf-m, ft-lb)
(2)
Center heat shield cover
(4)
Rear heat shield cover (4 door
model)
T1: 10 (1.02, 7.4)
T2: 18 (1.84, 13.3)
(1)
(2)
(3)
T
(2)
EI-01780
(3)
(1)
EI-02954
(4)
T1
T2
T2
T1
T1
T1
(2)
T2
T2
EI-25
General Description
EXTERIOR/INTERIOR TRIM
B: PREPARATION TOOL
TOOL NAME
REMARKS
Clip remover
Used for removing trim.
• KTC AP201-10A
• KTC AP201-N
• KTC AP203-10A
• KTC AP20L-10B
Or equivalent.
Clip clamp pliers
Used for removal of various clips and clamps.
• KTC CCP-190
Or equivalent.
EI-26
Front Grille
EXTERIOR/INTERIOR TRIM
2. Front Grille
A: REMOVAL
1) Remove the front bumper face. <Ref. to EI-31,
FRONT BUMPER FACE, REMOVAL, Front
2) Remove the screws from the reverse side of the
bumper face, and remove the front grille assembly.
B: INSTALLATION
Install each part in the reverse order of removal.
EI-02979
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст