Subaru Legacy (2005 year). Service manual — part 643
5MT-19
MANUAL TRANSMISSION AND DIFFERENTIAL
General Description
498247001
MAGNET BASE
• Used for measuring backlash between side
gear and pinion, and hypoid gear.
• Used with DIAL GAUGE (498247100).
498247100
DIAL GAUGE
• Used for measuring backlash between side
gear and pinion, and hypoid gear.
• Used with MAGNET BASE (498247001).
498427100
STOPPER
Used for securing drive pinion shaft assembly
and driven gear assembly when removing lock
nut of drive pinion shaft assembly.
498787100
MAIN SHAFT
STOPPER
Used for removing and installing lock nut of
transmission main shaft.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-498247001
ST-498247100
ST-498427100
ST-498787100
5MT-20
MANUAL TRANSMISSION AND DIFFERENTIAL
General Description
498937000
TRANSMISSION
HOLDER
Used for removing and installing transmission
main shaft lock nut.
499277100
BUSHING 1-2
INSTALLER
• Used for installing 1st driven gear thrust plate
and 1st-2nd driven gear bushing.
• Used for installing roller bearing outer races to
differential case.
499277200
INSTALLER
Used for press-fitting 2nd driven gear, roller
bearings, and 5th driven gear onto driven shaft.
499757002
INSTALLER
• Used for installing snap ring (OUT 25), and
ball bearing (25
× 26 × 17).
• Used for installing bearing cone of transfer
driven gear (extension core side).
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-498937000
ST-499277100
ST-499277200
ST-499757002
5MT-21
MANUAL TRANSMISSION AND DIFFERENTIAL
General Description
499787000
WRENCH ASSY
Used for removing and installing differential side
retainer.
499827000
PRESS
Used for installing speedometer oil seal when
installing speedometer cable to transmission.
499857000
5TH DRIVEN GEAR
REMOVER
Used for removing 5th driven gear.
499877000
RACE 4-5
INSTALLER
• Used for installing 4th needle bearing race and
ball bearing onto transmission main shaft.
• Used with REMOVER (899714110).
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-499787000
ST-499827000
ST-499857000
ST-499877000
5MT-22
MANUAL TRANSMISSION AND DIFFERENTIAL
General Description
499917500
DRIVE PINION
GAUGE ASSY
Used for adjusting drive pinion shim.
499927100
HANDLE
Used for fitting transmission main shaft.
499937100
TRANSMISSION
STAND SET
Used for transmission disassembly and assem-
bly.
499987003
SOCKET WRENCH
(35)
Used for removing and installing main shaft lock
nut.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-499917500
ST-499927100
ST-499937100
ST-499987003
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст