Subaru Legacy (2005 year). Service manual — part 883
AB-7
AIRBAG SYSTEM
General Description
• When painting or performing sheet metal work
on the side of the vehicle, including the side sill,
center pillar and front and rear doors, remove the
side airbag sensors and wire harness of the airbag
system.
• After removal of each parts for airbag system,
keep them with the pad facing upward on a dry,
clean and flat surface without heat, light sources,
moisture and dust.
• When airbag control module, front sub sensor,
side airbag sensor and curtain airbag sensor are
removed, do not reuse the bolts and nuts of them.
Always use new bolts and nuts for them.
AB-00129
AB-00056
AB-8
AIRBAG SYSTEM
General Description
• When storing a removed airbag module, do not place any objects on it or pile them up. If the airbag inflates
for some reason when it is placed with its pad side facing downward or under any object, a serious accident
may result.
(1)
Driver’s airbag module
(2)
Passenger’s airbag module
AB-00130
(2)
(1)
AB-9
AIRBAG SYSTEM
General Description
C: PREPARATION TOOL
1. SPECIAL TOOL
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
98299FC030
DEPLOYMENT
ADAPTER A
• Used for deploying side airbag module.
• Used for deploying curtain airbag module.
• Used with DEPLOYMENT TOOL
(98299PA030).
98299SA030
DEPLOYMENT
ADAPTER E
• Used for deploying driver’s airbag module.
• Used for deploying passenger’s airbag mod-
ule.
• Used with DEPLOYMENT TOOL
(98299PA030).
98299AG030
DEPLOYMENT
ADAPTER X
• Used for deploying driver’s airbag module.
• Used with DEPLOYMENT TOOL
(98299PA030).
• Can not reuse.
98299PA030
DEPLOYMENT
TOOL
• Used for deploying airbag module.
• Used with each deployment adapter.
ST98299FC030
ST98299SA030
ST98299AG030
ST98299PA030
S802.fm 9 ページ 2007年12月3日 月曜日 午後1時46分
AB-10
AIRBAG SYSTEM
General Description
2. GENERAL TOOL
TOOL NAME
REMARKS
TORX
®
T30
Used for removing and installing driver’s airbag module.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст