Subaru Legacy (2005 year). Service manual — part 783
VDC-21
VEHICLE DYNAMICS CONTROL (VDC)
Front Magnetic Encoder
9. Front Magnetic Encoder
A: NOTE
For the vehicle equipped with VDC, it has the same
magnetic encoder as installed to the vehicle
equipped with ABS. For removal, installation and
inspection procedure, refer to “Front Magnetic En-
coder”. <Ref. to ABS-16, Front Magnetic Encoder.>
VDC-22
VEHICLE DYNAMICS CONTROL (VDC)
Rear Magnetic Encoder
10.Rear Magnetic Encoder
A: NOTE
For the vehicle equipped with VDC, it has the same
magnetic encoder as installed to the vehicle
equipped with ABS. For removal, installation and
inspection procedure, refer to “Rear Magnetic En-
coder”. <Ref. to ABS-17, Rear Magnetic Encoder.>
VDC-23
VEHICLE DYNAMICS CONTROL (VDC)
VDC OFF Switch
11.VDC OFF Switch
A: REMOVAL
1) Remove the instrument panel lower cover.
2) Remove the screws, and then remove the VDC
OFF switch.
• RHD model
• LHD model
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Measure the resistance between VDC OFF switch
terminals.
• RHD model
• LHD model
If it is out of standard, replace the VDC OFF switch.
Switch position
Terminal No.
Standard
OFF
2 — 3
More than 1 M
Ω
ON
2 — 3
Less than 1
Ω
Switch position
Terminal No.
Standard
OFF
2 — 15
More than 1 M
Ω
ON
2 — 15
Less than 1
Ω
VDC00210
4 3 2 1
VDC00240
7 6 5
4 3 2 1
15
14 13 12 11 10
9 8
S402.fm 23 ページ 2007年12月3日 月曜日 午後1時45分
VDC-24
VEHICLE DYNAMICS CONTROL (VDC)
VDC OFF Switch
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст