Subaru Legacy (2005 year). Service manual — part 1015
CC-7
CRUISE CONTROL SYSTEM
Clutch Switch
5. Clutch Switch
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector from clutch switch,
and then remove the switch. <Ref. to CL-37, DIS-
ASSEMBLY, Clutch Pedal.>
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Measure the clutch switch resistance.
If NG, replace the clutch switch.
Switch
Pedal
Terminal No.
Standard
Clutch
Released
1 and 2
Less than 1
Ω
Depressed
1 and 2
More than 1 M
Ω
CC-00023
CC-8
CRUISE CONTROL SYSTEM
Inhibitor Switch
6. Inhibitor Switch
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector from inhibitor switch,
and then remove the switch. <Ref. to 4AT-52, RE-
MOVAL, Inhibitor Switch.>
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Measure the inhibitor switch resistance.
If NG, replace the inhibitor switch.
Selector lever
position
Terminal No.
Standard
P
7 and 12
Less than 1
Ω
N
Less than 1
Ω
Except P and N
More than 1 M
Ω
CC-00024
1
2
3
4
5
6
7
8
9
10
11
12
CC-9
CRUISE CONTROL SYSTEM
Neutral Position Switch
7. Neutral Position Switch
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector from neutral position
switch, and then remove the switch. <Ref. to 5MT-
40, BACK-UP LIGHT SWITCH AND NEUTRAL
POSITION SWITCH, REMOVAL, Switches and
Harness.>
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Measure the neutral position switch resistance.
If NG, replace the neutral position switch.
Gear shift position
Terminal No.
Standard
Neutral position
1 and 2
Less than 1
Ω
Other positions
More than 1 M
Ω
MT-00110
1
2
CC-10
CRUISE CONTROL SYSTEM
Neutral Position Switch
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст