Subaru Legacy (2005 year). Service manual — part 1005
EI-77
EXTERIOR/INTERIOR TRIM
Heat Shield Cover
37.Heat Shield Cover
A: REMOVAL
1. FRONT HEAT SHIELD COVER
Remove the four bolts to remove front heat shield
cover.
2. CENTER HEAT SHIELD COVER
Remove the nut and bolt to remove center heat
shield cover.
3. REAR HEAT SHIELD COVER
1) Remove the muffler. <Ref. to EX(H4SO 2.0)-12,
REMOVAL, Muffler.> <Ref. to EX(H4DOTC)-12,
REMOVAL, Muffler.>
2) Remove the four bolts to remove rear heat shield
cover.
B: INSTALLATION
Install in the reverse order of removal.
(A) Transmission mounting
DI-00211
(A)
EI-00679
EI-00680
EI-78
EXTERIOR/INTERIOR TRIM
Ornament
38.Ornament
A: INSTALLATION
1. LETTER MARK
Adhere the letter mark with the following dimensions.
• Sedan model
(a)
Apply the apply tape with aligning
its cut out to the end of trunk lid
garnish.
(b)
Apply the apply tape with aligning
it to R stop on the top end of trunk
lid garnish.
(C)
Align the slit of apply tape to panel
end.
(1)
Letter mark
(2)
Apply tape
(3)
Rear combination light
EI-00815
(2)
(b)
(a)
(a)
A
B
A
A-A
B-B
(1)
(2)
(C)
(3)
EI-79
EXTERIOR/INTERIOR TRIM
Ornament
• Wagon model
(a)
Apply the apply tape with aligning
its cut out to the end of rear gate
panel.
(b)
Apply the apply tape with aligning
it to the outer bottom end of rear
gate garnish.
(C)
Align the slit of apply tape to panel
end.
(1)
Letter mark
(3)
Rear gate garnish
(4)
Rear combination light
(2)
Apply tape
A-A
EI-00816
(2)
(b)
(3)
(a)
(a)
A
A
B
B-B
(1)
(2)
(C)
(4)
EI-80
EXTERIOR/INTERIOR TRIM
Ornament
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст