Subaru Legacy IV (2008 year). Service manual — part 473
ME(H6DO)-18
General Description
MECHANICAL
18231AA020
CAM SPROCKET
WRENCH
Used for removing and installing exhaust cam
sprocket.
499587200
CRANKSHAFT OIL
SEAL INSTALLER
• Used for installing crankshaft oil seal.
• Used together with the CRANKSHAFT OIL
SEAL GUIDE (499597100).
499597100
CRANKSHAFT OIL
SEAL GUIDE
• Used for installing crankshaft oil seal.
• Used together with the CRANKSHAFT OIL
SEAL INSTALLER (499587200).
499718000
VALVE SPRING
REMOVER
Used for removing and installing valve spring.
18251AA040
VALVE GUIDE
ADJUSTER
Used for installing valve guides.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST18231AA020
ST-499587200
ST-499597100
ST-499718000
ST18251AA040
ME(H6DO)-19
General Description
MECHANICAL
499765700
VALVE GUIDE
REMOVER
Used for removing valve guides.
499765900
VALVE GUIDE
REAMER
Used for reaming valve guides.
499977100
CRANK PULLEY
WRENCH
Used to stop rotation of the crank pulley when
loosening or tightening crank pulley bolts.
18252AA000
CRANKSHAFT
SOCKET
Used for rotating crankshaft.
1B022XU0
SUBARU SELECT
MONITOR III KIT
Used for troubleshooting the electrical system.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-499765700
ST-499765900
ST-499977100
ST18252AA000
ST1B022XU0
ME(H6DO)-20
General Description
MECHANICAL
18233AA000
PISTON PIN SNAP
RING PLIERS
Used for removing and installing snap ring of
piston pin.
498277200
STOPPER SET
Used for installing automatic transmission
assembly to engine.
499057000
TORX PLUS
®
Used for removing and installing the drive plate.
42099AE000
QUICK
CONNECTOR
RELEASE
Used for disconnecting quick connector of the
engine compartment.
18471AA000
FUEL PIPE
ADAPTER
Used for measuring fuel pressure.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST18233AA000
ST-498277200
ST-499057000
ST42099AE000
ST18471AA000
ME(H6DO)-21
General Description
MECHANICAL
2. GENERAL TOOL
E: PROCEDURE
It is possible to conduct the following service procedures with engine on vehicle, however, the procedures
described in this section are based on the condition that the engine is removed from vehicle.
• V-belt
• Timing chain
• Camshaft
• Cylinder head
42075AG690
FUEL HOSE
• Used for measuring fuel pressure.
• This is the SUBARU genuine part.
TOOL NAME
REMARKS
Compression gauge
Used for measuring compression.
Timing light
Used for measuring ignition timing.
Vacuum gauge
Used for measuring intake manifold vacuum.
Oil pressure gauge
Used for measuring engine oil pressure.
Fuel pressure gauge
Used for measuring fuel pressure.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST42075AG690
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст