Subaru Legacy IV (2008 year). Service manual — part 12
PI-5
Pre-delivery Inspection
PRE-DELIVERY INSPECTION
1. APPEARANCE CHECK
• If the vehicle is covered with protective coating,
visually check the vehicle body for damage and
dents.
• When the protective coating is removed, visually
check the body paints for damage or stains in detail
and repair as necessary.
• Visually check the windshield glass, door glass-
es and light lenses for any damage, cracks or ex-
cessive gaps to the body sheet metal and repair as
necessary.
• Visually check the plated parts, such as the
grilles and door knobs, for damage or loss of gloss
and replace the parts as necessary.
2. TIRE CHECK
• Check the tires for damage, defective, and dents
on wheels.
• Check and adjust the tire size, spare tire and tire
air pressure described on the tire air pressure label
(driver’s side).
3. FUSE INSTALLATION
Fuses for the back-up circuit have been removed to
prevent battery discharge. If the vehicle is about to
be delivered to the customer, attach a 20 A fuse (A)
as shown in the figure.
4. LOCK/UNLOCK AND OPEN/CLOSE
OPERATION CHECKS OF DOORS
1) Using the key, lock and unlock the door several
times to check for normal operation. Open and
close the door several times for smooth movement.
2) Completely close the driver’s door, and then
check the smooth movement with operating door
lock knob from lock to unlock several times. Set the
door lock knob (A) to lock position. Then pull the in-
ner remote (B) to ensure that doors will not open.
For other doors, place the door lock knob (A) to lock
position and then pull the inner remote (B) to en-
sure that doors will not open.
3) Close all the doors, and then press the lock on
power door lock switch at driver’s side. Check that
all doors including rear gate are locked.
PI-00158
(A)
(A) Unlock
(B) Lock
(A) Door lock knob
(B) Inner remote
PI-00246
(A)
(B)
(A)
(B)
PI-00192
PI-00392
PI-6
Pre-delivery Inspection
PRE-DELIVERY INSPECTION
4) Press the driver’s side power door lock switch to
unlock side. Check that all doors including rear
gate are unlocked.
5) Check that the power door lock switch on the
passenger’s side also locks and unlocks.
6) Insert the key to ignition switch, and open the
driver’s side door. Press lock on power door lock.
Check that the door is not locked.
5. OPERATION CHECK OF CHILD SAFETY
LOCK SYSTEM
1) Set the child safety lock on both rear doors to the
lock position.
2) Close the rear doors completely.
3) Check that the lock levers of the rear doors are in
the unlock position. Then, pull inner remote of rear
doors to ensure that the doors will not open.
4) Pull the outer handles to ensure that doors will
open.
6. OPEN/CLOSE OPERATION CHECKS OF
TRUNK LID
1) Operate the trunk lock release lever to check
that the trunk lid opens normally.
2) Open and close the trunk lid several times for
smooth movement.
3) Lock the trunk lock release lever using main key
or sub key.
4) Check that the trunk lock release lever does not
operate.
5) Check if the trunk lock release lever is not locked
and unlocked using valet key.
(A) Lock
(B) Unlock
PI-00393
PI-00247
(B)
(A)
(A) Lock
(B) Unlock
PI-00164
(A)
(B)
PI-00258
PI-7
Pre-delivery Inspection
PRE-DELIVERY INSPECTION
7. OPERATION CHECK OF TRUNK LID
RELEASE HANDLE
1) Use a flat tip screwdriver. Slide the screwdriver
blade from the slit aperture of the lock assembly ful-
ly to the end until you hear a click. This places the
latch in the locked position.
2) Move the release handle from outside the vehi-
cle in the direction of the arrow to check if the latch
is released.
8. LOCK/UNLOCK AND OPEN/CLOSE
OPERATION CHECKS OF REAR GATE
1) Open and close the rear gate several times for
smooth movement.
2) Operate the rear gate lever to check that the rear
gate is locked and unlocked normally.
(1) Remove the cover inside the rear gate.
(2) Operate the lever to check that the rear gate
is locked and unlocked normally.
9. OPERATION CHECK OF FUEL LID
OPENER LOCK RELEASE LEVER
Operate the fuel lid opener to check that the fuel fill-
er lid can be unlocked normally. Check that the filler
cap is securely closed.
PI-00248
PI-00249
PI-00165
PI-00166
PI-8
Pre-delivery Inspection
PRE-DELIVERY INSPECTION
10.ACCESSORY CHECK
Check that the following accessories are provided.
• Owner’s manual
• Warranty booklet
• Maintenance note
• Spare key
• Jack
• Tool set
• Spare tire
11.OPERATION CHECK OF FRONT HOOD
LOCK RELEASE SYSTEM
Operate the front hood lock release lever (A) to
check that the front hood is unlocked normally.
Operate the lever (B) and check that the front hood
is opened normally. Support the front hood with
hood stay.
(A) Jack
(B) Jack handle
PI-00168
(B)
(A)
PI-00169
(B)
(A)
(A)
PI-00195
PI-00381
(B)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст