Subaru Legacy IV (2008 year). Service manual — part 725
5AT-24
General Description
AUTOMATIC TRANSMISSION
18675AA000
DIFFERENTIAL
SIDE OIL SEAL
INSTALLER
Used for installing the differential side retainer oil
seal.
18654AA000
INSTALLER
Used for removing and installing the ball bearing.
28399SA010
OIL SEAL
PROTECTOR
Used for protecting oil seal when installing front
drive shaft.
18763AA000
COMPRESSOR
SHAFT
Used for disassembling multi-plate clutch for shift
transmission.
18765AA000
COMPRESSOR
SUPPORT
Used for disassembling multi-plate clutch for shift
transmission.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST18675AA000
ST18654AA000
ST28399SA010
ST18763AA000
ST18765AA000
5AT-25
General Description
AUTOMATIC TRANSMISSION
18676AA020
TORX
®
WRENCH
Used for disassembling torque converter case.
18854AA000
ANGLE GAUGE
Used for tightening parking support.
498077300
REMOVER
Used for removing ball bearing of reduction
driven gear.
499587100
OIL SEAL
INSTALLER
Used for installing the oil seal.
499787500
ADAPTER
Used for removing and installing drive pinion lock
nut.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST18676AA020
ST18854AA000
ST-498077300
ST-499587100
ST-499787500
5AT-26
General Description
AUTOMATIC TRANSMISSION
499575400
GAUGE
Used for measuring the total end play.
18762AA000
COMPRESSOR
SPECIAL TOOL
Used for disassembling multi-plate clutch for shift
transmission.
499755602
PRESS
Used for installing the parking gear.
18680AA010
HOLDER GEAR
Used for removing reduction driven gear assem-
bly. (2-piece set)
18766AA000
SUPPORT PULLER
Used for removing reduction driven gear assem-
bly.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-499575400
ST18762AA000
ST-499755602
ST18680AA010
ST18766AA000
5AT-27
General Description
AUTOMATIC TRANSMISSION
2. GENERAL TOOL
18767AA000
REMOVER
• Used to pull out the parking gear.
• Used to pull out the bearing from the VTD
assembly.
TOOL NAME
REMARKS
Depth gauge
Used for measuring the transmission end play.
Thickness gauge
Used for measuring clearance of the clutch, brake and oil pump.
Micrometer
Used for measuring thickness of the drive pinion.
Spring scale
Used for measuring the starting torque of the drive pinion.
Circuit tester
Used for measuring resistance and voltage.
TORX
®
T70
Used for removing and installing differential gear oil drain plug.
Snap ring pliers
Used for removing and installing each snap ring.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST18767AA000
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст