Subaru Legacy IV (2008 year). Service manual — part 724
5AT-20
General Description
AUTOMATIC TRANSMISSION
498277200
STOPPER SET
• Used for removing and installing automatic
transmission assembly to engine.
• Used for preventing the torque converter from
falling.
41099AC000
ENGINE SUPPORT
ASSY
Used for supporting engine.
41099AA010
ENGINE SUPPORT
BRACKET
Used for supporting engine.
41099AA020
ENGINE SUPPORT
Used for supporting engine.
398527700
PULLER ASSY
• Used for removing the extension case roller
bearing.
• Used for removing the extension oil seal.
• Used for removing the front differential side
retainer bearing outer race.
• Used for removing the front differential side
retainer oil seal.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-498277200
ST41099AC000
ST41099AA010
ST41099AA020
ST-398527700
5AT-21
General Description
AUTOMATIC TRANSMISSION
498057300
INSTALLER
Used for installing the extension oil seal.
498077000
REMOVER
Used for removing the differential taper roller
bearing.
18630AA010
WRENCH COMPL
RETAINER
Used for removing and installing the differential
side retainer.
398487700
DRIFT
Used for installing the front differential taper
roller bearing.
498255400
PLATE
Used for measuring the backlash of hypoid gear.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-498057300
ST-498077000
ST18630AA010
ST-398487700
ST-498255400
5AT-22
General Description
AUTOMATIC TRANSMISSION
498247001
MAGNET BASE
• Used for measuring the gear backlash.
• Used together with DIAL GAUGE
(498247100).
498247100
DIAL GAUGE
• Used for measuring the gear backlash.
• Used together with MAGNET BASE
(498247001).
498517000
REPLACER
Used for removing the front roller bearing.
499787700
WRENCH
Used for removing and installing the drive pinion
lock nut.
398643600
GAUGE
Used for measuring total end play, extension end
play and drive pinion height.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-498247001
ST-498247100
ST-498517000
ST-499787700
ST-398643600
5AT-23
General Description
AUTOMATIC TRANSMISSION
398744300
PISTON GUIDE
Used for measuring height from mating surface
of the main case to pressure plate.
499737100
PULLER SET
Used for removing the reduction driven gear
assembly.
498077600
REMOVER
Used for removing the ball bearing.
18667AA010
HOLDER
• Used for removing and installing the drive pin-
ion lock nut.
• Used as a handle to rotate gear when check-
ing tooth contact.
1B022XU0
SUBARU SELECT
MONITOR III KIT
Used for troubleshooting the electrical system.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-398744300
ST-499737100
ST-498077600
ST18667AA010
ST1B022XU0
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст