Subaru Legacy IV (2008 year). Service manual — part 961
PS-6
General Description
POWER ASSISTED SYSTEM (POWER STEERING)
3. OIL PUMP
• H4 model
(1)
Oil pump
(3)
Bracket
Tightening torque:N·m (kgf-m, ft-lb)
(2)
Pulley
(4)
Belt tension nut
T1: 8 (0.8, 5.8)
T2: 15.7 (1.6, 11.6)
T3: 22 (2.2, 15.9)
T4: 25 (2.5, 18.4)
T5: 48.4 (4.9, 35.7)
T4
T3
T3
T5
T1
T2
T3
(3)
(2)
(1)
(4)
PS-00988
PS-7
General Description
POWER ASSISTED SYSTEM (POWER STEERING)
• H6 model
(1)
Oil pump
(3)
Bracket
Tightening torque:N·m (kgf-m, ft-lb)
(2)
Pulley
(4)
Belt tensioner
T1: 15.7 (1.6, 11.6)
T2: 25 (2.5, 18.4)
T3: 33 (3.4, 24.3)
T4: 37.3 (3.8, 27.5)
PS-00699
T4
T3
T3
T3
T1
T2
(2)
(3)
(1)
(4)
PS-8
General Description
POWER ASSISTED SYSTEM (POWER STEERING)
C: CAUTION
• Wear appropriate work clothing, including a cap, protective goggles and protective shoes when performing
any work.
• Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, in-
stallation, disassembly and replacement.
• Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.
• Use SUBARU genuine power steering fluid, grease etc. or the equivalent. Do not mix fluid, grease etc. of
different grades or manufacturers.
• Be sure to tighten fasteners including bolts and nuts to the specified torque.
• Place shop jacks or rigid racks at the specified points.
• Before securing a part on a vise, place cushioning material such as wooden blocks, aluminum plate or
cloth between the part and the vise.
D: PREPARATION TOOL
1. SPECIAL TOOL
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
925711000
PRESSURE
GAUGE
Used for measuring oil pressure.
926200000
STAND
• Used when inspecting characteristic of gear-
box assembly and disassembling it.
• Used together with BOSS D (34199AG000).
34099AC010
ADAPTER HOSE A
Used together with PRESSURE GAUGE
(925711000).
ST-925711000
ST-926200000
ST34099AC010
PS-9
General Description
POWER ASSISTED SYSTEM (POWER STEERING)
34099AC020
ADAPTER HOSE B
Used together with PRESSURE GAUGE
(925711000).
926230000
SPANNER
For the lock nut when adjusting backlash of gear-
box.
34099PA100
SPANNER
Used when measuring the rotating resistance of
gearbox assembly.
926420000
PLUG
When fluid leaks from pinion side of gearbox
assembly, remove pipe B from valve housing,
attach this tool and check fluid leaking points.
926390001
COVER &
REMOVER ASSY
Used for installing rack assembly.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST34099AC020
ST-926230000
ST34099PA100
ST-926420000
ST-926390001
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст