Subaru Legacy III (2000-2003 year). Service manual — part 33
FU(H4SO)-34
FUEL INJECTION (FUEL SYSTEMS)
IDLE AIR CONTROL SOLENOID VALVE
11.Idle Air Control Solenoid
Valve
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector from the idle air con-
trol solenoid valve.
3) Remove the idle air control solenoid valve from
the throttle body.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Always use new gasket.
Tightening torque:
1.6 N·m (0.16 kgf-m, 1.2 ft-lb)
FU-00009
FU-00298
FU-00299
FU-00299
FU(H4SO)-35
FUEL INJECTION (FUEL SYSTEMS)
EGR VALVE
12.EGR Valve
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector from EGR valve.
3) Remove the EGR valve from intake manifold.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
19 N·m (1.9 kgf-m, 13.7 ft-lb)
FU-00009
FU-00210
FU-00211
FU-00211
FU(H4SO)-36
FUEL INJECTION (FUEL SYSTEMS)
FUEL INJECTOR
13.Fuel Injector
A: REMOVAL
1. RH SIDE
1) Release the fuel pressure. <Ref. to FU(H4SO)-
48, RELEASING OF FUEL PRESSURE, OPERA-
TION, Fuel.>
2) Open the fuel flap lid, and remove the fuel filler
cap.
3) Disconnect the ground cable from battery.
4) Remove the resonator chamber. <Ref. to
IN(H4SO)-8, REMOVAL, Resonator Chamber.>
5) Remove the spark plug cords from the spark
plugs (#1 and #3 cylinders).
6) Remove the power steering pump and tank from
the brackets.
(1) Remove the front side V-belt. <Ref. to
ME(H4SO)-41, REMOVAL, V-belt.>
(2) Remove the bolts which hold the power
steering pipes onto the intake manifold protec-
tor.
(3) Remove the bolts which install the power
steering pump to the bracket.
(4) Disconnect the connector from the power
steering pump switch.
(5) Remove the power steering tank from the
bracket by pulling it upwards.
(6) Place the power steering pump and tank on
the right side wheel apron.
FU-00009
FU-00302
FU-00255
FU-00139
FU-00017
FU-00020
FU-00021
FU(H4SO)-37
FUEL INJECTION (FUEL SYSTEMS)
FUEL INJECTOR
7) Remove the fuel pipe protector RH.
8) Disconnect the connector from fuel injector.
9) Remove the bolt which holds the injector pipe to
the intake manifold.
10) Remove the fuel injector from the intake mani-
fold.
(1) Remove the fuel injector securing clip.
(2) Remove the fuel injector while lifting up the
fuel injector pipe.
2. LH SIDE
1) Release the fuel pressure. <Ref. to FU(H4SO)-
48, RELEASING OF FUEL PRESSURE, OPERA-
TION, Fuel.>
2) Open the fuel flap lid, and remove the fuel filler
cap.
3) Disconnect the ground cable from battery.
FU-00267
FU-00303
FU-00284
FU-00304
FU-00305
FU-00306
FU-00009
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст